A1395SEHLT-T Allegro Microsystems, Linear Hall Effect Sensor, 6-Pin MLP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

A1391/2/3/5 3V Linear Hall Effect Sensors, Allegro Microsystems

The A1391/2/3/5 family of linear Hall effect sensors provides a voltage output that is directly proportional to an applied magnetic field.

The A139x minimise current consumption to less than 25 μA through the addition of a user-selectable sleep mode, perfect for battery-operated applications. You can control the current consumption by applying a logic level signal to the SLEEP pin. The outputs of the devices are not valid (high-impedance mode) during sleep mode.

High-impedance output during sleep mode
Compatible with 2.5 V to 3.5 V power supplies
10 mW power consumption in the active mode
Ratiometric output scales with the ratiometric supply reference voltage (VREF pin)
Temperature-stable quiescent output voltage and sensitivity
Wide ambient temperature range: –20°C to 85°C
ESD protection greater than 3 kV
Preset sensitivity and offset at final test

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Linear
Mounting Type Surface Mount
Pin Count 6
Minimum Operating Supply Voltage 2.5 V
Maximum Operating Supply Voltage 3.5 V
Length 2mm
Width 3mm
Height 0.67mm
Dimensions 2 x 3 x 0.67mm
Minimum Operating Temperature -20 °C
Maximum Operating Temperature +85 °C
Package Type MLP
365 In stock for FREE next working day delivery
Price Each (In a Pack of 5)
£ 1.656
(exc. VAT)
£ 1.987
(inc. VAT)
Units
Per unit
Per Pack*
5 - 20
£1.656
£8.28
25 - 95
£1.136
£5.68
100 - 245
£0.94
£4.70
250 - 495
£0.894
£4.47
500 +
£0.824
£4.12
*price indicative
Packaging Options:
Related Products
The Honeywell SS500 Series are low-cost Hall-effect sensors ...
Description:
The Honeywell SS500 Series are low-cost Hall-effect sensors in a SOT-89B surface-mount package. These compact devices are thermally balanced over the full operating temperature range and the open-collector outputs are easily interfaced with a wide variety of electronic circuits.
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect ...
Description:
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. The A3213 to 825 μW and the A3214 to 14 ...
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique Hall element geometries and low offset amplifiers minimise noise and ...
The range of isolation amplifier optocouplers from Avago ...
Description:
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor ...