A1324LUA-T Allegro Microsystems, Linear Hall Effect Sensor, 3-Pin SIP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems

The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.

Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.

Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.

Temperature-stable quiescent output voltage and sensitivity
Output voltage proportional to magnetic flux density
Low-noise output increases accuracy
Precise recoverability after temperature cycling
Ratiometric rail-to-rail output
Wide ambient temperature range: –40°C to 150°C
Immune to mechanical stress
Solid-state reliability
Enhanced EMC performance for stringent automotive applications

Hall Effect Sensors, Allegro MicroSystems

Attribute Value
Magnetic Type Linear
Mounting Type Through Hole
Pin Count 3
Minimum Operating Supply Voltage 4.5 V
Maximum Operating Supply Voltage 5.5 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SIP
1000 In stock for FREE next working day delivery
Price Each (In a Bag of 500)
£ 0.788
(exc. VAT)
£ 0.946
(inc. VAT)
Per unit
Per Bag*
500 +
*price indicative
Related Products
Allegro’s diverse selection of speed sensor ICs provide ...
Allegro’s diverse selection of speed sensor ICs provide optimized solutions for many non-automotive applications where speed or speed and direction information are needed. These sensor ICs can handle designs using various target geometries, materials, and sensing orientations. Allegro’s portfolio of speed sensor ICs contains solutions able to address requirements for ...
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacing Laser trimmed thin and thick film resistors-40 to 125°C operating range.
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with Bi CMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique Hall element geometries and low offset amplifiers minimise noise ...