ATS468LSGTN-T Allegro Microsystems, Transducer Hall Effect Sensor, 4-Pin SIP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

The ATS468 is a true zero-speed gear tooth sensor IC consisting of an optimized Hall IC and a permanent magnet pellet configuration in a single overmolded package. The integrated circuit provides a manufacturer-friendly solution for digital gear tooth sensing applications. This small package can be easily assembled and used in conjunction with gears of various shapes and sizes.

Wide operating voltage range
Peak detecting algorithm robust against signal perturbations
Capable of sensing a wide range of target types
Running mode calibration for continuous optimization
Single chip IC for high reliability
Precise duty cycle signal throughout operating temperature range
Large operating air gaps
Automatic Gain Control (AGC) for air-gap-independent switchpoints

Specifications
Attribute Value
Magnetic Type Transducer
Mounting Type Through Hole
Pin Count 4
Minimum Magnetic Sensor Release Point 3 Gs
Maximum Magnetic Sensor Operating Point 10 Gs
Minimum Operating Supply Voltage 4 V
Maximum Operating Supply Voltage 26.5 V
Length 29.45mm
Width 5.5mm
Height 5.5mm
Dimensions 29.45 x 5.5 x 5.5mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SIP
Available to back order for despatch when stock is available
Price Each (On a Reel of 800)
£ 2.088
(exc. VAT)
£ 2.506
(inc. VAT)
Units
Per unit
Per Reel*
800 - 800
£2.088
£1,670.40
1600 +
£2.035
£1,628.00
*price indicative
Related Products
Dual element devices are integrated circuits that contain ...
Description:
Dual element devices are integrated circuits that contain two independent Hall-effect switches. The digital outputs are out-of-phase (quadrature) when interfaced with the proper ring magnet design. These quadrature signals can be processed to determine target speed and direction. Alternately, the A1232 and A1233 internally process these switch outputs into speed ...
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with Bi CMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique Hall element geometries and low offset amplifiers minimise noise ...
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a ...
Description:
The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The voltage regulator enables operation from 3.8 V to 24 V. On-board protection circuitry provides a ±30 V absolute maximum voltage rating for automotive and industrial motor commutation applications.All devices ...
Allegro Current sensor ICs in CA and CB ...
Description:
Allegro Current sensor ICs in CA and CB packages Conductor resistance of 100 μΩ typical for ultra low-power loss Automotive grade options for harsh applications environments3000 Vrms galvanic isolation. 50A to 200A Integrated Current Sensor ICs, Allegro Micro Systems. Hall Effect Current Sensors, Allegro Micro Systems.