Semikron SKYPER 12 press-fit C 600A, Gate Driver Module CMOS, 15 A, 15V

  • RS Stock No. 122-0387
  • Mfr. Part No. SKYPER 12 press-fit C 600A
  • Brand Semikron
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

SKYPER® 12 Press-fit IGBT Driver Module

The Semikron SKYPER® 12 press-fit modules are IGBT drivers for SEMIX Press-fit and Econodual Press-fit IGBT modules. The half-bridge driver boards can be mounted directly onto 17mm press-fit modules. With 30% fewer components than other plug-and-play solutions, these drivers achieve an MTBF rate of over 5 million hours at full load and the 1W per channel outputs can drive IGBTs with ratings of up to 600A and 1700V.
For suitable IGBT modules see 122-0385 to 122-0387

• Fits to 1200V & 1700V IGBT modules
• Drives Econodual and SEMIX press-fit modules
• Two 1W output channels for half-bridge applications
• Up to 8 μC gate charge output capacity
• Qualified safe operating area ensures best possible performance
• High reliability with MTBF rate > 5 Million hours
• Short-circuit protected over the complete operating temperature range
• Dynamic Short Circuit Protection (DSCP) by VCE monitoring and direct Soft-Off
• Robust rectangle signal transmission
• High noise immunity with short pulse suppression and robust interface
• Insulated over-temperature trip on secondary side
• Primary and secondary under-voltage protection (UVP)
• Integrated isolated power supply for the secondary side

MOSFET & IGBT Drivers, Semikron

Specifications
Attribute Value
Logic Type CMOS
Output Current 15 A
Supply Voltage 15V
Mounting Type PCB Mount
7 In stock for FREE next working day delivery
Price Each
£ 125.98
(exc. VAT)
£ 151.18
(inc. VAT)
Units
Per unit
1 - 1
£125.98
2 - 4
£119.11
5 - 9
£109.18
10 +
£97.77
Related Products
The Semikron Board 1 SKYPER® 32 R is ...
Description:
The Semikron Board 1 SKYPER® 32 R is an adaptor board for the IGBT driver module allowing customisation to suit the specific IGBT output module used. The switching characteristics of the IGBTs can be influenced through user selection of the appropriate RGon and RGoff components and it is also possible ...
Silicon Labs Si826x range of ISOdrivers are pin-compatible ...
Description:
Silicon Labs Si826x range of ISOdrivers are pin-compatible drop-in upgrades for popular gate drive optocouplers. These devices are ideal for driving power MOSFETs and IGBTs used in a wide variety of inverter and motor control applications. The Si826x isolated gate drivers use Silicon Labs proprietary silicon isolation technology which supports ...
The NCV5700 is a high-current, high-performance stand-alone IGBT ...
Description:
The NCV5700 is a high-current, high-performance stand-alone IGBT driver for high power applications that include solar inverters, motor control and uninterruptable power supplies. The device offers a cost-effective solution by eliminating many external components. Device protection features include Active Miller Clamp, accurate UVLO, EN input, DESAT protection and Active Low ...
High Current Output (+4.0/-6.0 A) at IGBT Miller ...
Description:
High Current Output (+4.0/-6.0 A) at IGBT Miller Plateau voltages Low VOH and VOLActive Miller Clamp (NCD5701A only)DESAT Protection with Programmable Delay Reduced switching losses and short switching times Full enhancement of IGBTPrevents Spurious Gate Turn-on Enhanced programmable protection ApplicationsDC-AC Inverter Battery Charger PFCMotor Driver DriverEnd Products Solar Inverters Uninteruptible ...