Microchip MCP48FVB02-E/UN, 2-Channel Serial DAC, 10-Pin MSOP

  • RS Stock No. 159-7570
  • Mfr. Part No. MCP48FVB02-E/UN
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

MCP48FVB01/02 8 Bit Digital-to-Analogue Converters

The Microchip MCP48FVB01/02 family are 8-bit voltage output Digital-to-Analogue Converters (DACs) that offer high performance with low power consumption and fast settling time. Featured on-board is Volatile Memory and a SPI Interface that supports write commands up to 20 MHz and read commands of up to 10 MHz. Four different Voltage Reference options are offered.


8-Bit Output Voltage Resolution (256 steps)
Rail-to-Rail Output
Fast Settling Time: 7.8 μs (typical)
DAC Voltage Reference Options: Device VDD, External VREF (buffered or unbuffered) and Internal Bandgap (1.22 V typical)
Output Gain Options: Unity (1x), 2x (when not using internal VDD as voltage source)
Volatile Memory (RAM)
Power-Down modes
Low-Power Consumption: 180 μA Normal Operation (maximum), 650 nA Power Down Operation (typical)
Single-Supply Operation: 2.7 V to 5.5 V
SPI Interface

Digital to Analogue Converters - Microchip

Attribute Value
Resolution 8 bit
Number of DAC Channels 2
Digital Interface Type Serial (SPI)
Mounting Type Surface Mount
Package Type MSOP
Power Supply Type Single
Typical Single Supply Voltage 1.8 → 2.7 V, 2.7 → 5.5 V
Voltage Reference Internal
Architecture Resistor String
Pin Count 10
Maximum Settling Time 7.8µs
Output Polarity Bipolar
Full Scale Error 4.5LSB
Maximum Operating Temperature +125 °C
Integral Nonlinearity Error +0.5LSB
Height 0.95mm
Width 3mm
Length 3mm
Minimum Operating Temperature -40 °C
Dimensions 3 x 3 x 0.95mm
400 In stock - FREE next working day delivery available
Price Each (In a Tube of 100)
£ 0.668
(exc. VAT)
£ 0.802
(inc. VAT)
Per unit
Per Tube*
100 +
*price indicative
Related Products
Reduce Parts Count and Board Space with Fully ...
Reduce Parts Count and Board Space with Fully Integrated System Monitor and Controller Monitors 8 (MAX1220) or 16 Voltages (MAX1257/MAX1258) Using 12-Bit, 225ksps ADCControls 8 Output Voltage Level with 12-Bit, Octal, 2μs Settling DAC with Ultra-Low Glitch Energy (4n x VS)Measures Temperature with Internal ±1°C Accurate Temperature Sensor Options for ...
16-/12-Bit Resolution Available in a 4mm x 4mm, ...
16-/12-Bit Resolution Available in a 4mm x 4mm, 24-Pin TQFN Package or 16-Pin TSSOPHardware-Selectable to Zero/Midscale DAC Output on Power-Up or Reset Double-Buffered Input Registers Active-Low LDAC Asynchronously Updates DAC Outputs Simultaneously Active-Low READY Facilitates Daisy Chaining High-Performance 10ppm/°C Internal Reference Guaranteed Monotonic Over All Operating Conditions Wide +2.7V to ...
Low-Power Consumption (80μA max)14-/16-Bit Resolution in a 3mm ...
Low-Power Consumption (80μA max)14-/16-Bit Resolution in a 3mm x 5mm, 8-Pin μMAX Package Relative Accuracy±0.40 LSB INL (MAX5214, 14-Bit typ, ±1 LSB max)±1.2 LSB INL (MAX5216, 16-Bit typ, ±4 LSB max) Guaranteed Monotonic Over All Operating Ranges Low Gain and Offset Error Wide 2.7V to 5.5V Supply Range Rail-to-Rail Buffered ...
Ultra-Low Supply Current115μA at VDD = 3.6V135μA at ...
Ultra-Low Supply Current115μA at VDD = 3.6V135μA at VDD = 5.5V 300nA Low-Power Power-Down Mode Single 2.7V to 5.5V Supply Voltage Fast 400k Hz I²C-Compatible 2-Wire Serial Interface Schmitt-Trigger Inputs for Direct Interfacing to Optocouplers Rail-to-Rail Output Buffer Amplifiers Three Software-Selectable Power-Down Output Impedances100kΩ, 1kΩ, and High Impedance Readback Mode ...