Linear Technology LTC2411CMS#PBF, 24 (Minimum) bit ADC Differential Input, 10-Pin MSOP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The LTC2411/LTC2411-1 are 2.7V to 5.5V micropower 24-bit differential Delta Sigma analog-to-digital converters with an integrated oscillator, 2ppm INL and 0.29ppm RMS noise. They use delta-sigma technology and provide single cycle settling time for multiplexed applications. Through a single pin, the LTC2411 can be configured for better than 110dB differential mode rejection at 50Hz or 60Hz ™2%, and the LTC2411-1 can provide better than 87dB input differential mode rejection over the range of 49Hz to 61.2Hz, or they can be driven by an external oscillator for a user-defined rejection frequency.

24-Bit ADC in an MS10 Package
Low Supply Current
Differential Input and Differential Reference with GND to VCC Common Mode Range
0.29ppm Noise
No Latency: Digital Filter Settles in a Single Cycle
Internal Oscillator
110dB Min, Pin Selectable 50Hz/60Hz Notch Filter (LTC2411)
Simultaneous 50Hz/60Hz Rejection (LTC2411-1)

Specifications
Attribute Value
Resolution 24 (Minimum) bit
Number of ADCs 1
Mounting Type Surface Mount
Number of Input Channels 1
Architecture Delta Sigma
Typical Single Supply Voltage Maximum of 5.5 V
Package Type MSOP
Pin Count 10
Input Signal Type Differential
Input Type Differential
Power Supply Type Single
Dimensions 3 x 3 x 0.86mm
Length 3mm
Maximum Operating Temperature +70 °C
Width 3mm
Minimum Operating Temperature 0 °C
Height 0.86mm
Available to back order for despatch 08/07/2020
Price Each (In a Tube of 50)
£ 6.877
(exc. VAT)
£ 8.252
(inc. VAT)
Units
Per unit
Per Tube*
50 - 200
£6.877
£343.85
250 - 450
£6.701
£335.05
500 +
£6.533
£326.65
*price indicative
Related Products
16-Bit A/D Converters16-Bit D/A Converters Programmable Input/Output Sample ...
Description:
16-Bit A/D Converters16-Bit D/A Converters Programmable Input/Output Sample Rates75 dB ADC SNR70 db DAC SNR64 ksps Maximum Sample Rate-90 db Crosstalk Programmable Input/Output Gain Low group Delay: 25 μs per ADC ch50 μs per DAC ch Flexible Serial Port Allows Up to 4 Codecs To Be Connected in Cascade Giving ...
MCP45HV51 is a single-channel, high voltage digital potentiometer ...
Description:
MCP45HV51 is a single-channel, high voltage digital potentiometer (Digipot) family that supports 10V ∼36V or +/-5V to +/-18V power rails. It features 8-bit resolution with I2C interface. This family is available in TSSOP-14 and QFN-20 (5x5) packages and has 5kΩ, 10 kΩ, 50 kΩ, and 100 kΩ end-to-end resistance(RAB) options ...
20-Bit Noise-Free Resolution570n VRMS Noise at 10sps, ±3.6VFS ...
Description:
20-Bit Noise-Free Resolution570n VRMS Noise at 10sps, ±3.6VFS Input3ppm INL (typ), 10ppm (max)No Missing Codes Ultra-Low Power Dissipation Operating-Mode Current Drain 100dB (min) 50Hz/60Hz Rejection SPI-, QSPI™-, MICROWIRE®-Compatible Serial Interface On-Demand Offset and Gain Self-Calibration and System Calibration User-Programmable Offset and Gain Registers-40°C to +85°C Operating Temperature Range±2kV ESD Protection ...
Real-Time Current and Power Monitoring±1.5% (max) Current-Sense Accuracy±1.5% ...
Description:
Real-Time Current and Power Monitoring±1.5% (max) Current-Sense Accuracy±1.5% (max) Power-Sense Accuracy Two Uncommitted Comparators (MAX4211)1.21V Reference Output (MAX4211)Three Current/Power Gain Options100mV/150mV Current-Sense Full-Scale Voltage+4V to +28V Input Source Voltage Range+2.7V to +5.5V Power-Supply Voltage Range Low Supply Current: 380μA (MAX4210)220k Hz Bandwidth Small 6-Pin TDFN and 8-Pin μMAX Packages (MAX4210) ...