Huco L Gearbox, 1:1 Gear Ratio, 0.68 Nm Maximum Torque

  • RS Stock No. 748-437
  • Mfr. Part No. 332.31.2
  • Brand Huco
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

L-Box Right Angle Drives

Two types of L-Shaped right angle drive boxes. One has hardened steel gears and the other Acetal Homopolymer gears bonded to hardened steel shafts. Nylon housing has two counter-bored clearance holes for conventional chassis mounting and a tapped insert below each shaft for vertical mounting.

1:1 gear ratio
Lubricated for life
Steel gear version has electrical isolation between shafts and housing
Acetal homopolymer gear version has electrical isolation between shafts, and between shafts and housing

Gear Material Housing Material Shaft Material Housing Length (mm) Housing Width (mm) Housing Height (mm)
Hardened Steel Nylon 6.6 Hardened Steel 30.5 18.7 30.5
Acetal Homopolymer Nylon 6.6 Hardened Steel 30.5 18.7 30.5
//media.rs-online.com/t_line/L748437-03.gif
//media.rs-online.com/t_line/L748443-01.gif
//media.rs-online.com/t_line/LD748437-03.gif
//media.rs-online.com/t_line/LD748443-01.gif
//media.rs-online.com/t_line/LE748437-03.gif
//media.rs-online.com/t_line/LI748437-30.gif
//media.rs-online.com/t_line/LI748443-10.gif
Specifications
Attribute Value
Gear Ratio 1:1
Gearbox Type L
Maximum Output Torque 0.68 Nm
Shaft Diameter 4mm
Overall Length 30.5mm
Overall Width 30.5mm
Overall Depth 18.7mm
50 In stock for FREE next working day delivery
Price Each
£ 22.59
(exc. VAT)
£ 27.11
(inc. VAT)
Units
Per unit
1 +
£22.59
Related Products
These gearheads are designed to fit Panasonic 3 ...
Description:
These gearheads are designed to fit Panasonic 3 Series 60W (and 90W) AC single and three phase motors. The flange offers improved mounting that is often required for the higher powered motors. Grease-lubricated gearboxes10000hr life. Quiet operation. Class B motor insulation.
The motors and gearheads are connected by simply ...
Description:
The motors and gearheads are connected by simply screwing the gearhead onto a thread on the motor body, and then applying tiny spot of high impact adhesive in the thread to lock the construction tight. Very high output torque due to planetary construction. All the gear stages are metal construction. ...
A range of high quality steel geared gearboxes ...
Description:
A range of high quality steel geared gearboxes with the following features:. Maximum output 4Nm. Metal throughout for high reliability and performance and dissipation of heat. Sintered bronze bearings. Maximum radial load on output shaft 25NMaximum axial load on output shaft 20NMaximum continuous output power 15 watts. Output shaft sealed ...
Low to medium power dc. motors fitted with ...
Description:
Low to medium power dc. motors fitted with a square mounting flange, centring bush and drive pinion. This allows simple and quick attachment to a 65mm square gearbox. All motors have sintered bronze bearings lubricated for life32mm diameter motors have built-in interference suppression, whilst the 42mm diameter motors have replaceable ...