McLennan Servo Supplies Spur Gearbox, 125:1 Gear Ratio, 5 Nm Maximum Torque

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Adaptable Gearboxes 4Nm

A range of high quality steel geared gearboxes with the following features:

Maximum output 4Nm
Metal throughout for high reliability and performance and dissipation of heat
Sintered bronze bearings
Maximum radial load on output shaft 25N
Maximum axial load on output shaft 20N
Maximum continuous output power 15 watts
Output shaft sealed to eliminate grease escaping from the gearbox
Comprehensive instruction sheet supplied giving fitting instructions

//media.rs-online.com/t_line/L718852-01.gif
Specifications
Attribute Value
Gear Ratio 125:1
Gearbox Type Spur
Maximum Output Torque 5 Nm
Overall Width 56mm
Overall Depth 41mm
1 In stock - FREE next working day delivery available
Price Each
£ 123.73
(exc. VAT)
£ 148.48
(inc. VAT)
Units
Per unit
1 - 4
£123.73
5 +
£119.94
Related Products
The unit has steel bevel gears and shafts ...
Description:
The unit has steel bevel gears and shafts running in ball races and sintered bronze bearings, one ball race and one sintered bronze bearing per shaft. The ball races also act as a thrust race protecting the bevel gears from axial pressures of varying loads. The moulded housings are 30% ...
These gearheads are designed to fit Panasonic 3 ...
Description:
These gearheads are designed to fit Panasonic 3 Series 60W (and 90W) AC single and three phase motors. The flange offers improved mounting that is often required for the higher powered motors. Grease-lubricated gearboxes10000hr life Quiet operation Class B motor insulation.
Panasonic 3 Series Motors, with identical mounting dimensions ...
Description:
Panasonic 3 Series Motors, with identical mounting dimensions as the G Series, replace and offer the following benefits over G Series Motors:. Grease-lubricated gearboxes10000hr life Quiet operation Class B motor insulation.
The motors and gearheads are connected by simply ...
Description:
The motors and gearheads are connected by simply screwing the gearhead onto a thread on the motor body, and then applying tiny spot of high impact adhesive in the thread to lock the construction tight. Very high output torque due to planetary construction All the gear stages are metal construction. ...