RS PRO Gate Valve, 1/2in

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Crane Bronze Gate Valves D151 and D237

Valves are manufactured in accordance with BS 5154 PN20 series B and are BSI Kitemark approved.
Also suitable for use in class 125 imperial systems specifying valves to BS 1952 at rating: 250 Ibf /in² CWP: 125Ibf/ in² at 353°F
Solid wedge disc
Non- rising stem
Screwed in bonnet
Each valve individually tested to BS 5154

//media.rs-online.com/t_line/L282079-01.gif
//media.rs-online.com/t_line/L282080-01.gif

Approvals

BSI Kitemark License No. KM-07296

Standards

BS 5154 PN20 Series B; BS 1400-LG2; BS 2872 CZ122; BS 2874 CZ121

Specifications
Attribute Value
Connection 1/2 in BSPT
Maximum Working Pressure 20 bar
Handle Height from Center 78mm
Body Material Bronze
Disc Material Bronze
Connection Size 1/2in
Thread Standard or Connection Type BSPT Female
7 In stock - FREE next working day delivery available
Price Each
£ 54.14
(exc. VAT)
£ 64.97
(inc. VAT)
Units
Per unit
1 - 4
£54.14
5 - 9
£52.48
10 +
£51.53
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgings EPDM seals Creep resistant bearings Reinforced nylon handle Reduced risk of contamination by top and bottom seals Operating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 bar Polished disc.
Female screwed type bronze globe valves. These inline ...
Description:
Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. • Rising stem• PTFE renewable disk• High-quality PTFE packing• Body design conditions: PN32• 198°C at 14 bar, 100°C at 32 bar.
2/2- way pneumatically operated angle seat valves. Available ...
Description:
2/2- way pneumatically operated angle seat valves. Available in both NO (Normally Open) and NC (Normally Closed) configurations and with the flow direction above or below the seat For use with neutral gases, air, steam, water and oil. 2//2-way, normally closed by spring action Polyamide actuator casing and PTFE seal ...
To avoid noise in long runs of pipework ...
Description:
To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second Suitable for use with water or compressed air Can be installed in any position and serviced in situ Single piece acetal resin cartridge Preset pressure40°C maximum ...