Altera DK-DEV-5AGTD7N Arria V GT Development Kit 5AGTFD7K3F40I3N

  • RS Stock No. 778-5354
  • Mfr. Part No. DK-DEV-5AGTD7N
  • Brand Altera
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Arria V GT FPGA Development Kit, Altera

The Altera Arria® V GT FPGA Development Kit provides a complete design environment that includes all the hardware and software that you need to develop full FPGA designs and test them within a system environment.

Unit 1
Arria V GT FPGA: 5AGTFD7K3F40I3N
1152MB x 72 DDR3 SDRAM
4.5MB (1MB x 36) QDR II+ SRAM
1Gb sync Flash (x16)
PCI Express (PCIe) x8 edge connector
HSMC Port A (Eight transceiver channels)
USB 2.0
Gigabit Ethernet communication
Chip-to-chip bridge with 29 LVDS inputs, 29 LVDS outputs and x8 transceivers
2 x SFP+ channels
Bull's Eye connector (3 x 10Gbps transceiver channel)
SMA connector (10Gbps transceiver channel)
Configuration: JTAG, Fast passive parallel (FPP) parallel Flash loader (PFL)
Buttons, switches, LEDs and displays
CPU reset push button
3 x user push buttons
8 x DIP switches
16 x user LEDs (including eight bi-colour diodes)
3 x PCIe LEDs
3 x HSMA Status LEDs
2 line x 16 character LCD display

Unit 2
Arria V GT FPGA: 5AGTFD7K3F40I3N
x64 DDR3 SDRAM soft controller (or x32 hard intellectual property (IP) controller)
HSMC Port B (Four transceiver channels)
FMC Port (Ten transceiver channels)
Chip-to-chip bridge with 29 LVDS inputs and 29 LVDS outputs, and x8 transceivers
Serial digital interface (SDI) channel
Bull's Eye connector (6Gbps transceiver channel)
Bull's Eye connector (10Gbps transceiver channel)
SMA connector (10Gbps transceiver channel)
Configuration: JTAG, Fast passive parallel (FPP) parallel Flash loader (PFL)
Buttons, switches, LEDs and displays
CPU reset push button
3 x user push buttons
8 x DIP switches
16 x user LEDs (including eight bi-colour diodes)

EPM2210GF324 system controller
EPM570GM100 on-board USB-Blaster II download cable
Clocking: 50MHz and 148.5MHz oscillator
100MHz and four 4 output programmable oscillators
SMA input (LVPECL)
Power: Laptop DC input, PCIe edge connector
System monitoring, Power: (voltage, current, and wattage), per unit per rail

Supplied with

Loopback and debug HSMC cards, Samtec's Bull's Eye assembly kit, cables, documentation, software

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Programmable Logic Technology FPGA
Kit Classification Development Kit
Featured Device 5AGTFD7K3F40I3N
Kit Name Arria V GT
Available to back order for despatch 13/09/2022
Price Each
£ 3,378.60
(exc. VAT)
£ 4,054.32
(inc. VAT)
Units
Per unit
1 +
£3,378.60
Related Products
The ST25DV-DISCOVERY is a demonstration kit to evaluate ...
Description:
The ST25DV-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the ST25DV series of dynamic NFC/RFID tag ICs. • 168MHz STM32F415VGT6 Cortex-M4F MCU with 1MB Flash memory, 192 + 4KB SRAM • On-board ST-LINK hardware for microcontroller firmware upgrade and debug • Harvested energy measurement circuit • ...
Mikromedia Plus board featuring an STMicroelectronics STM32 ARM ...
Description:
Mikromedia Plus board featuring an STMicroelectronics STM32 ARM Cortex-M4 32-bit microcontroller and a colour touchscreen LCD panel. STM32F407ZG Cortex-M4 168MHz 32-bit microcontroller, 1MB Flash memory, 192KB + 4KB SRAM25MHz crystal oscillator32768Hz crystal oscillator for RTCBattery holder for RTC backup2.048V voltage reference8Mbit SPI serial Flash memory480 x 272 LCD TFT touchscreen ...
Mikromedia Plus board featuring a Microchip PIC32MX7xx 32-bit ...
Description:
Mikromedia Plus board featuring a Microchip PIC32MX7xx 32-bit microcontroller and a colour touchscreen LCD panel. PIC32MX795F512L 80MHz 32-bit microcontroller, 512KB Flash memory, 128KB RAM16MHz crystal oscillator32768Hz crystal oscillator for RTC2.048V voltage reference8Mbit SPI serial Flash memory480 x 272 LCD TFT touchscreen display MCP23S17 16-bit I/O SPI serial port expander USB ...
The Trenz electronic starter kit consists of a ...
Description:
The Trenz electronic starter kit consists of a TE0720-03-1CFA module on a TE0703-05 carrier board including a heatsink. It has an electric rating of 5V, two VG96 connectors (DIN 41612), a 16Gb micro SD card and a USB cable. The SoC modules with commercial temperature range integrating a Xilinx Zynq-Z020, ...