RS PRO Radial Flow Turbine Flow Meter, 1.5 L/min → 30 L/min

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Liquid Flow Sensors

Two flow transducers manufactured in acetal copolymer with brass compression fittings at both ends to fit 15mm diameter pipe connections.

Provides a pulsed output proportional to flow rate
LED and photodetector are separated by a turbine mounted on sapphire bearings
LED requires an external current limiting resistor (dependent on supply voltage)
Suitable for use with mains and heating system waters etc.
Rise/fall times 60/6ns
Output voltage 200mV (low); VCC (high)
Diode: Forward current 10mA, Power dissipation 100mW

Note

Not suitable for use with strong mineral acids/solutions, strong or searching solvents.

//media.rs-online.com/t_line/LI257133-01.gif
//media.rs-online.com/t_line/LI341480-10.gif
Specifications
Attribute Value
Media Monitored Liquid
Device Type Radial Flow Turbine
Minimum Flow Rate 1.5 L/min
Maximum Flow Rate 30 L/min
Supply Voltage 4.5 → 16 V dc
Pipe Diameter Range 15 mm
Maximum Pressure 20bar
Material Acetal Copolymer
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
Current Rating 10 mA
72 In stock - FREE next working day delivery available
Price Each
£ 32.91
(exc. VAT)
£ 39.49
(inc. VAT)
Units
Per unit
1 +
£32.91
Related Products
Calibrated flow indicator with switched output specifically designed ...
Description:
Calibrated flow indicator with switched output specifically designed for use with water. Suitable for installation in any plane. Utilises the technique of differential pressure across a piston against a calibrated spring, with the flow rate read off a scale marked on the viewing window. The switch incorporates an AC magnetically ...
The Key Instruments MR3000 series variable area flow ...
Description:
The Key Instruments MR3000 series variable area flow meter measures the gas flow rate of 1L/min to 10L/min. This is a high tech, moulded, low cost manufactured from high impact polycarbonate. It can operate at pressures of 100psig and temperatures of 150°F (65°C). These economically designed units provide high-quality and ...
The Sensirion LS32-1500 enables precise, non-invasive measurements of ...
Description:
The Sensirion LS32-1500 enables precise, non-invasive measurements of dynamic liquid flow rates up to 40 ml/min bi-directionally. Excellent biocompatibility is ensured by the exclusive use of high-performance stainless steel, PTFE and PEEK for the wetted parts. Excellent repeatability High chemical compatibility.
Works according to the variable area principle and ...
Description:
Works according to the variable area principle and permits an accurate measurement of liquid media. Any orientation Rugged metal design Natural glassG 1//4 BSP thread16 bar operating pressure120°C maximum operating temperature Generally used as an indication that something is not working and can be found in cooling circuits. Variable Area ...