Cynergy3 Vertical Float Switch, Stainless Steel, Direct Load, Float
- RS Stock No.:
- Mfr. Part No.:
- COO (Country of Origin):
Dual Position Stainless Steel Float Switch
Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications.
Two Independent Switching Points
Lower Float Make on Fall, and Upper Float Make on Rise
Minimum Fluid SG: 0.80
Switch Differential (each level) Nominal: 1mm
Suitable for High and Low Level Alarm and Control Signal
Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications
Vertical Mounting, M16 x 2 Thread
Temperature Range: -20 to +135°C
Safe Area for Use in Petrochemical, Storage, and Process Control Applications
All ratings in tech. spec. table are for resistive loads only
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
|Switch Output||Direct Load|
|Body Material||Stainless Steel|
|Minimum Operating Temperature||-20°C|
|Maximum Operating Temperature||+135°C|
|Maximum Current||600 mA|