Cynergy3 Vertical Float Switch, Stainless Steel, Direct Load, Float, 15m

  • RS Stock No. 446-2610
  • Mfr. Part No. SLP4AP15
  • Brand Cynergy3
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Cynergy3 Switch Level Probe

The Cynergy3 SLP series switch level probe is a vertical mount type and has direct load output. This level switch probe has a stainless steel body. It has a maximum operating pressure of 5bar. The switch is high tech device designed to be suspended into the liquid by its cable. It can be configured to give make or break action on either rise or fall of liquid level by removing the protective Shield and reversing the float orientation. The switching level can be adjusted by changing the cable length. The reed switch contact is suitable for switching signal levels, up to 250V. The main uses for this probe are in level indication for narrow boreholes or applications with restricted space and also as a signal switch for reservoir high or low-level monitoring.

Features and Benefits

Minimum fluid SG is 0.8
Maximum switching power 25VA
Cable length is standard 15m
Cable type is PVC sheathed
Maximum operating temperature is 55°CSubmersible probe
Low space requirement
This switch is cable mounted
Single switch point configurable for N/O or N/C contacts to operate on either rise or fall of a level no power requirement

Certifications

ISO9001

Specifications
Attribute Value
Device Type Float
Mounting Type Vertical
Switch Output Direct Load
Body Material Stainless Steel
Cable Length 15m
Minimum Operating Temperature 0°C
Maximum Operating Temperature +55°C
Maximum Current 600 mA
Maximum Pressure 5bar
5 In stock - FREE next working day delivery available
Price Each
£ 110.74
(exc. VAT)
£ 132.89
(inc. VAT)
Units
Per unit
1 - 4
£110.74
5 - 9
£107.34
10 +
£103.88
Related Products
The Cynergy3 RFS10 series drop float switch is ...
Description:
The Cynergy3 RFS10 series drop float switch is designed to eliminate the problems associated with limescale build-up around the pivot point of the conventional float switch. It has an electrical rating of 240VAC and 0.6A. This particular series is primarily for applications where a high-level condition has to be monitored. ...
The Gems Sensors float switch is designed for ...
Description:
The Gems Sensors float switch is designed for higher temperatures and in pressurized or corrosive liquids. It is an exceptionally accurate and rugged switch. It has mounting thread G1/4in Warning:The cable entry point must not be submerged under any circumstances They must be fitted through the wall of a tank ...
The MP1C series of float switches are designed ...
Description:
The MP1C series of float switches are designed to maintain the air cushion in autoclaves, the switches can be entered into the tank through a coupling due to its small diameter and mounted either horizontally or vertically. For compressor receivers or pressurised tank Supplied with gland and counterweight Installation through ...
The Cynergy3 MS series of float switches are ...
Description:
The Cynergy3 MS series of float switches are designed for large tanks, cisterns or reservoirs, and can be installed on submersible pumps. The MS float switches are capable of reaching 100m in depth. MS float switches come with a 5m PVC cable. What is it made from?The flow switch case ...