Cynergy3 Direct Mounting Float Switch, Polypropylene, Direct Load, Float, 500mm
- RS Stock No.:
- Mfr. Part No.:
- COO (Country of Origin):
|1 - 4||£16.71|
|5 - 9||£16.22|
Cynergy3 Float Switch
The Cynergy3 RFS10 series drop float switch is designed to eliminate the problems associated with limescale build-up around the pivot point of the conventional float switch. It has an electrical rating of 240VAC and 0.6A. This particular series is primarily for applications where a high-level condition has to be monitored. This drop float type switch is used for monitoring upper level and the extended drop float type is used for monitoring the lower level in a tank.
Suitable for signal switching and use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e. G. filament lamps) loads.
0.5m of PVC 16//0.2 cable (polypropylene and polysulfone ETFE) (PPS).
Features and Benefits
Float positioned below the switch in N/C position
Switch opens well before liquid level reaches the float pivot
Pivot out of liquid
High level switch position
Flying lead or M12 connector
Fluid SG of 0.70
Hot vending machines
|Mounting Type||Direct Mounting|
|Switch Output||Direct Load|
|Minimum Operating Temperature||-20°C|
|Maximum Operating Temperature||+100°C|
|Maximum Current||600 mA|