E10 Indicator Light, Clear, 2.2 V, 250 mA, 10h
- RS Stock No. 655-9233
- Brand RS PRO
E10 Lens End (Teat Type) MES
Ideal for applications where a narrow beam of light is required
Torch Lamps
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80 mA).
Operation from a dc. supply at rated voltage can reduce specified life by up to 50%.
The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%; and 5% below will significantly increase lamp life.
Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
| Attribute | Value |
|---|---|
| Voltage Rating | 2.2 V |
| Lamp Base | E10 |
| Current Rating | 250 mA |
| Diameter | 10mm |
| Length | 25 mm |
| Lens Colour | Clear |
| Luminosity | 4 lm |
| Life Hours | 10h |
