RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.

SES/E14 Indicator Light, Clear, 220 → 260 V, 38 mA, 3000h

Available to back order for despatch 23/03/2021
Add to Basket

Price Each (In a Pack of 5)


(exc. VAT)


(inc. VAT)



RS Stock No.:
COO (Country of Origin):
UnitsPer unitPer Pack*
5 - 45£1.786£8.93
50 - 245£1.636£8.18
250 - 495£1.454£7.27
500 - 1245£1.258£6.29
1250 +£1.072£5.36
*price indicative

T16 (16mm) Tubular SES (E14)

Screw (LES, MES, SES)

Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.

Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).

Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.

Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.

Voltage Rating220 → 260 V
Lamp BaseSES/E14
Current Rating38 mA
Lamp SizeT16
Length35 mm
Lens ColourClear
Luminosity30 lm
Life Hours3000h