MG Chemical, 50 ml Yellow Dual Cartridge Epoxy Adhesive for Ceramic, Glass, Metal, Plastic

  • RS Stock No. 181-0361
  • Mfr. Part No. 9200FR-50ML
  • Brand MG Chemical
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CA
Product Details

9200FR is a toughened, flame retardant, two-part epoxy adhesive, designed to create long-lasting load bearing joints. It adheres strongly to materials that are difficult to bond to, including glass, ceramics, metals, engineered thermoplastics, and thermoset laminates, such as SMC (sheet molding compound) and GRP (glass-reinforced plastics). It creates tough vibration-resistant bonds, and is especially useful for joining dissimilar materials that will experience thermal cycling stresses. This product also provides excellent electrical insulation, and protects against static discharges, thermal shocks, galvanic corrosion, environmental humidity, salt water, fungus, and many harsh chemicals. It is smooth, non-sagging and thixotropic, so it is excellent for use on vertical surfaces and for gap-filling. It is also useful for potting electronics in enclosures with gaps where a non-thixotropic encapsulant would flow through.

Specifications
Attribute Value
Material Compatibility Ceramic, Glass, Metal, Plastic
Colour Yellow
Package Type Dual Cartridge
Package Size 50 ml
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
Cure Time 1.5 h @ +80 °C, 3 h @ +65 °C, 16 h @ +40 °C, 24 h @ +22 °C
Flame Retardant Yes
Shear Strength 0.7 (ABS) N/mm², 2.3 (Polycarbonate) N/mm², 10 (Aluminium) N/mm², 12 (Copper) N/mm², 13 (Brass) N/mm², 14 (Stainless Steel) N/mm²
Viscosity Description Low
Operating Temperature Range -40 → +150 °C
Specific Gravity 1.3
Physical Form Liquid
Viscosity Measurement 370000 (Part B) cP/s, 380000 (Part A) cP/s
Available to back order for despatch 21/11/2019
Price Each
£ 22.45
(exc. VAT)
£ 26.94
(inc. VAT)
Units
Per unit
1 - 14
£22.45
15 - 39
£21.55
40 +
£19.83
Related Products
The required amount of putty is torn from ...
Description:
The required amount of putty is torn from the strip and kneaded by hand until the blue and white strip has turned a uniform colour. Gel time 6 minutes at +20°CWill bond and seal a wide variety of materialsCan be used to fill cracks and holesCan be moulded to any ...
Two-part structural adhesives and dispensing systems which allows ...
Description:
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application ...
Resistance properties:-,Chemical - Good,Heat - Good,Water - Good. ...
Description:
Resistance properties:-,Chemical - Good,Heat - Good,Water - Good. Colour - Water whiteRoom temperature curingLow viscosityReflective index similar to glassIdeal for large areas of bonding and/or a long working time.
Colour - Pale yellowExcellent Impact resistanceRoom temperature curing, ...
Description:
Colour - Pale yellowExcellent Impact resistanceRoom temperature curing, high strength and toughnessVersatile and excellent resistance to dynamic loadingIdeal for large areas of bonding and/or a long working time.