MG Chemical, 25 ml Yellow Syringe Epoxy Adhesive for Various Materials

  • RS Stock No. 181-0360
  • Mfr. Part No. 9200FR-25ML
  • Brand MG Chemical
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CA
Product Details

9200FR is a toughened, flame retardant, two-part epoxy adhesive, designed to create long-lasting load bearing joints. It adheres strongly to materials that are difficult to bond to, including glass, ceramics, metals, engineered thermoplastics, and thermoset laminates, such as SMC (sheet molding compound) and GRP (glass-reinforced plastics). It creates tough vibration-resistant bonds, and is especially useful for joining dissimilar materials that will experience thermal cycling stresses. This product also provides excellent electrical insulation, and protects against static discharges, thermal shocks, galvanic corrosion, environmental humidity, salt water, fungus, and many harsh chemicals. It is smooth, non-sagging and thixotropic, so it is excellent for use on vertical surfaces and for gap-filling. It is also useful for potting electronics in enclosures with gaps where a non-thixotropic encapsulant would flow through.

Attribute Value
Material Compatibility Ceramic, Glass, Metal, Plastic
Colour Yellow
Package Type Syringe
Package Size 25 ml
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
Cure Time 1.5 h @ +80 °C, 3 h @ +65 °C, 16 h @ +40 °C, 24 h @ +22 °C
Flame Retardant Yes
Shear Strength 0.7 (ABS) N/mm², 2.3 (Polycarbonate) N/mm², 10 (Aluminium) N/mm², 12 (Copper) N/mm², 13 (Brass) N/mm², 14 (Stainless Steel) N/mm²
Specific Gravity 1.3
Operating Temperature Range -40 → +150 °C
Viscosity Measurement 370000 (Part B) cP/s, 380000 (Part A) cP/s
Physical Form Liquid
Viscosity Description Low
4 In stock for FREE next working day delivery
Price Each
£ 14.70
(exc. VAT)
£ 17.64
(inc. VAT)
Per unit
1 - 14
15 - 39
40 +
Related Products
The required amount of putty is torn from ...
The required amount of putty is torn from the strip and kneaded by hand until the blue and white strip has turned a uniform colour. Gel time 6 minutes at +20°CWill bond and seal a wide variety of materials Can be used to fill cracks and holes Can be moulded ...
TPM550 features high thermal conductivity of 5.5 W/m.K ...
TPM550 features high thermal conductivity of 5.5 W/m.K and becomes workable at approximately 45°C. The material’s advanced formulation ensures minimal contact thermal resistance. Like TPM350, TPM550 also produces no mess due to its thixotropic characteristics which prevent flow outside of defined interfaces. TPM550 can be reworked and its lower specific ...
The Araldite 50ml epoxy adhesive is a 2-component, ...
The Araldite 50ml epoxy adhesive is a 2-component, thixotropic, structural grey paste available in gel form. It offers excellent environmental and chemical resistance. It is ideal for applications that require higher than normal temperatures in aggressive environmental conditions. This innovative material is designed to bond a wide variety of substrates ...
The ITW Devcon 50ml epoxy resin is a ...
The ITW Devcon 50ml epoxy resin is a 2-part structural resin and dispensing systems which allow the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply this adhesive, a system of ...