DesignSpark Enclosure Mounting & Installation 110.09 x 110.09 x 18.5mm for use with DesignSpark Raspberry Pi Case

  • RS Stock No. 122-3465
  • Mfr. Part No. ASM-1900048-21
  • Brand DesignSpark
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

VESA Mounting Brackets for DesignSpark Raspberry Pi 3 cases

These VESA mounting brackets enable you to mount a DesignSpark Raspberry Pi 3 case to the back of a display or monitor using the VESA attachment points. Note: Pi case not included.

Each bracket includes a locking clip which can be used to prevent the SD card from being removed from the Raspberry Pi.

Within the mounting bracket there is space to add a 2.5 inch hard drive for additional memory for your Raspberry Pi project.

Includes two M3 screws to attach a DesignSpark case to the mounting bracket.

These brackets are available in three colours:

• Clear bracket RS 122-3463
• White bracket RS 122-3464
• Black bracket RS 122-3465

The VESA mounting brackets are suitable for the following DesignSpark Pi cases:

• Clear case RS 103-4296
• White case RS 103-4297
• Black case RS 103-4295
• Black case RS 103-4300

Specifications
Attribute Value
Dimensions 110.09 x 110.09 x 18.5mm
Length 110.09mm
Width 110.09mm
Height 18.5mm
For Use With DesignSpark Raspberry Pi Case
270 In stock for FREE next working day delivery
Price Each
£ 1.75
(exc. VAT)
£ 2.10
(inc. VAT)
Units
Per unit
1 +
£1.75
Related Products
This case is designed to house and protect ...
Description:
This case is designed to house and protect the Arduino UNO and Ethernet Shield. UNO Board and Ethernet Shield are held via clip-in grooves - No Screws Required All cut-outs are pre-cut into the case Supplied with Rubber feet Gloss Finish.
The Pa PiRus HAT case is transparent and ...
Description:
The Pa PiRus HAT case is transparent and suitable for Pa PiRus HAT and a Raspberry Pi. The case protects the devices from damage. Features•4 button actuators allow you to use the programmable buttons on the Pa Pirus HAT without the need to open up the case•All ports on the ...
The Takachi AWN series is a heavy duty ...
Description:
The Takachi AWN series is a heavy duty waterproof enclosure ideally suited to tough outdoor environments. These enclosures have diecast side plates and an extruded aluminium body with fins on either side which act as a heat sink. Application examples include LED outdoor power supply case, enclosed switch, controller or ...
Pi Camera Box Bundle includes Pi Camera Box ...
Description:
Pi Camera Box Bundle includes Pi Camera Box Case, Magnetic Fish-Eye Lens and Camera Box Wall Mount. The bundle is suitable for housing the Raspberry Pi computer with Pi Camera module. The design prevents damaging the fragile ribbon on the Camera during operation. Extra magnetic camera lens can be added ...