Fluke 83 x 16.2 x 112.9mm Inspection Window for use with NEMA 12 Enclosure, NEMA 4 Enclosure

  • RS Stock No. 820-2995
  • Mfr. Part No. FLUKE-CV200
  • Brand Fluke
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Fluke Infrared Red (IR) Inspection Windows

The ClirVu® IR windows from Fluke increase the safety and speed of electrical thermal imaging inspections. These inspection windows also reduce the risk of arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive maintenance.

Quick and easy installation, just 5 minutes with one technician
Only one hole required with standard Greenlee® punch (rear access required for punch connection only)
Installs from front, no template needed or rear access required
Grounds instantly to metal enclosure with patent pending AutoGround™ process
Sharp teeth on jam nuts assure four gas-tight ground connections
All components have electrically conductive finishes for optimum grounding
Work permit requirements and NFPA 70E processes are significantly reduced
Full PPE is often not required so inspections are done fast and easy
Superior arc blast protection
High temperature silicon gaskets
Mounting and door latches provide high pressure gasket compression
Die cast components are manufactured with the highest strength alloys
Jam nut screws are made from 4037 steel, heat treated to 160,000 psi tensile
IP67 Protection
Corrosion and UV resistance for challenging outdoor environments
Three sizes 50mm, 75mm and 95mm with the option of hand turn or security key door latches


Stock nos. 820-2998, 820-3005 and 820-3002 have a keylock.


Torture Tested to the highest test ratings: IEEE C37.20.7 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE.

Attribute Value
Type Inspection Window
Length 83mm
For Use With NEMA 12 Enclosure, NEMA 4 Enclosure
Width 16mm
Material Aluminium, Zinc
Dimensions 83 x 16.2 x 112.9mm
Height 113mm
Colour Black
5 In stock for FREE next working day delivery
Price Each
£ 206.99
(exc. VAT)
£ 248.39
(inc. VAT)
Per unit
1 +
Related Products
Bopla feet for use with Ultramas Enclosure. Desk ...
Bopla feet for use with Ultramas Enclosure. Desk enclosures for electronics equipment.May be used in either a horizontal or vertical position.Feature lower and upper air vents.Bosses for European standard size cards are located inside the enclosure shells.Grooves for vertical installation of cards are located on the enclosure sides.A set of ...
A range of durable high temperature diecast boxes ...
A range of durable high temperature diecast boxes with RFI shielding properties. Diecast aluminium box with smooth finish Close fitting lid held by M3 screws into tapped holes in body Easily drilled and machined Internal 1.5 mm slots for holding PCBs Can withstand temperatures of up to 260°C (without Seal)External ...
Anodised aluminium panels 2mm thick which fit directly ...
Anodised aluminium panels 2mm thick which fit directly into front bezels and are recessed by 2mm to provide mounting for membrane keyboards, LEDs, switches etc Suitable for silk screen printing Clear anodised finish.
Compact terminal enclosure for DIN Rail or wall ...
Compact terminal enclosure for DIN Rail or wall mounting, designed to hold double-pole PCB connection terminals. Polycarbonate material - Colour Grey (RAL7035)Compact design that can hold up to 16 double-pole terminals IP20 rating.