Megger 1010-518 Current Clamp, For Use With MVC1010 UKAS

  • RS Stock No. 183-9467
  • Mfr. Part No. 1010-518
  • Brand Megger
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

The current probe is designed for measurements of AC currents up to 1000 A with a 1000:1 step-down ratio. The probe offers excellent accuracy (0.3% error at full range) and small phase shift (0.7° at full range) so it can be used for metering of power, energy and power quality applications. Such high performance is achieved because the magnetic cores are made from high-permeability FeNi alloy. The rated terminating resistance (burden) of 1 Ω must be provided by the instrument connecting to MCC1010 and MVC1010. The output terminals are protected with a voltage limiting circuit ensuring a safe-to-touch voltage under all rated conditions.

CAT IV 600 V current measurement to 1000 A AC
1 mA/1 A sensitivity with rated burden of 1 Ω
Large jaws for cables up to 52 mm
Overvoltage protection of the output terminals
Suitable for leakage currents

Specifications
Attribute Value
Accessory Type Current Clamp
For Use With MVC1010
Calibrated UKAS
1 In stock for delivery within 2 working days
Price Each
£ 359.00
(exc. VAT)
£ 430.80
(inc. VAT)
Units
Per unit
1 +
£359.00
Not available for guaranteed pre 9am/10am delivery
Related Products
The Fluke power quality clamp meter is the ...
Description:
The Fluke power quality clamp meter is the ideal meter for commissioning and troubleshooting modern electrical loads. With a bright colour display to analyse the harmonic spectrum, a low-pass filter to remove high-frequency noise, and a high EMC immunity design, the Fluke 345 is ideal for measurements on switching loads ...
The Fluke milliamp process clamp meter measures current ...
Description:
The Fluke milliamp process clamp meter measures current between 4mA and 20mA loops without breaking the loop or bringing down the system. Best in class 0.2% accuracy0.01mA resolution and sensitivity Measure mA signals for PLC and control system analogue I/ODual backlit display with both, mA measurement and per cent of ...
The Fluke True-RMS clamp meter measures the current ...
Description:
The Fluke True-RMS clamp meter measures the current up to 2000A (AC/DC) and voltage up to 600VAC and 1k VDC. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. ...
The Tektronix ’long nose’ style clamp-on probe uses ...
Description:
The Tektronix ’long nose’ style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. Equipped with a BNC connector, it can be used with a shrouded banana plug adapter*1. It can also be used on digital multimeters, Tek Meter, and scopes. This device can ...