Fluke 9100S/RS-A-256 Drywell Calibrator, RTD, 1.5A
- RS Stock No. 537-026
- Mfr. Part No. 9100S/RSA
- Brand Fluke
Fluke 9100S Hand Held Temperature Drywell
A drywell heat source offering a combination of extreme portability and good performance to meet the requirements associated with high speed, high volume industrial calibrations in a shop floor environment. Use the instruments independently or together to make fast zero and span calibrations of temperature sensors.
Drywell for checking RTDs, thermocouples, and small bimetal thermometers in the field
Fast and easy calibrations of temperature sensors
Temperature range 35°C to 375°C, expandable to –10 °C to 375 °C when used with a 9102S drywell (see stock no 537-048)
Direct interface to the Fluke 744 Documenting Process Calibrator
Multiple sized sensor holes to accept a wide range of temperature sensor diameters
Note
For 9100S carry case see stock no. 537-044
Supplied with
Power Cord, User's Guide with Report of Calibration, RS-232 Cable, 9930 Interface-it Software and User's Guide
Fluke 9100 Series Drywell Heat Sources
| Attribute | Value |
|---|---|
| Thermocouple Type | RTD |
| Accuracy | 0.25 °C |
| Well to Well Conformity | ±0.2°C |
| Stability | ±0.07°C |
| Dimensions | 150 x 125 x 57mm |
| Weight | 1.1kg |
| Height | 57mm |
| Length | 150mm |
| Maximum Operating Temperature | +50°C |
| Maximum Source Voltage | 230V ac |
| Minimum Source Voltage | 115V ac |
| Maximum Source Current | 1.5A |
| Minimum Operating Temperature | +5°C |
| Minimum Source Current | 0.8A |
| Maximum Source Frequency | 65Hz |
| Model Number p | 9100S |
| Minimum Source Frequency | 45Hz |
| Width | 125mm |
