Entrelec, BJS 2-Pole Jumper Bar for Terminal Block

  • RS Stock No. 482-1132
  • Mfr. Part No. 1SNA205774R1500 - BJS32-2
  • Brand Entrelec
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Power terminal blocks from 35 to 120mm2

Ranges of power terminal blocks, fitted with 1 or 2 covers, for DIN rail.
A stopper, screw bridge bars and a branch for Faston 6.35 x 0.8mm tabs are available separately.
Central hex socket connection screw, 6mm.
M6 screw for direct fixing.

Approvals

UL, CSA

Specifications
Attribute Value
Accessory Type 2-Pole Jumper Bar
Series BJS
For Use With Terminal Block
11 In stock - FREE next working day delivery available
Price Each
£ 16.14
(exc. VAT)
£ 19.37
(inc. VAT)
Units
Per unit
1 - 4
£16.14
5 - 9
£15.32
10 - 24
£14.53
25 - 49
£13.73
50 +
£12.90
Related Products
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is ...
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.
Requires a separator end section every 40cm approx ...
Description:
Requires a separator end section every 40cm approx and at DIN rail extremities. A 6mm dia hole is required in the cover at each separator. Transparent PVC protective cover, 1m length in 2 sizes Snap-fits into place and secured with a plastic fastener For both symmetric and asymmetric DIN rails. ...
These screwless spring cage clamp terminals are specifically ...
Description:
These screwless spring cage clamp terminals are specifically designed for use with 'Top Hat' rail.,The top entry conductor connection is simplicity itself; a flat-bladed screwdriver will ease the spring clamp apart ready for conductor insertion.The range covers conductor sizes from 2.5mm² to 10mm² stranded wire (4mm² to 16mm² solid wire). ...