PULS, CP DIN Rail Power Supply, 24V dc Output Voltage, 20A Output Current

  • RS Stock No. 165-1372
  • Mfr. Part No. CP20.241
  • Brand PULS
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The Dimension CP-Series are cost optimized power supplies without compromising quality, reliability and performance. The most outstanding features of the CP20 series are the high efficiency, electronic inrush current limitation, active PFC, wide operational temperature range and the extraordinary small size. The devices have a power reserve of 20% included, which may even be used continuously at temperatures up to +45°C. High immunity to transients and power surges as well as low electromagnetic emission, a DC-OK relay contact makes this unit suitable for nearly every situation.

AC 100-240V Wide-range Input
Width only 48mm
Efficiency up to 95.6%
Excellent Partial Load Efficiency
20% Output Power Reserves
Easy Fuse Breaking - 3 times nominal current for 12ms
Safe HiccupPLUS Overload Mode
Active Power Factor Correction (PFC)
Minimal Inrush Current Surge
Full Power Between -25°C and +60°C
DC-OK Relay Contact
Current Sharing Feature for Parallel Use

Specifications
Attribute Value
AC or DC Output Voltage Dc
Input Voltage 230V ac
Output Voltage 24 V dc
Output Current 20 A
Power Rating 480W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 124mm
Width 48mm
Output Voltage Adjustment Range 24 → 28V
Minimum Temperature -25°C
Hazardous Area Certification ATEX, IECEx
Ripple And Noise 50mV Pk-Pk
Maximum Temperature +70°C
Special Features Active Power Factor Correction, Excellent Partial Load Efficiency, Output Power Reserves, Safe Hiccup PLUS, Wide Range of Input 100 to 240 V ac
Load Regulation 100 mV, 1000 mV
MTBF 1060000h
Series CP
Standards Met ATEX, CE, CSA, CULus Listed, CULus Recognized, GL, IECEx, UL 508, UL 60950-1
Mounting Type DIN Rail Mount
Depth 127mm
59 In stock for FREE next working day delivery
Price Each
£ 234.39
(exc. VAT)
£ 281.27
(inc. VAT)
Units
Per unit
1 +
£234.39
Related Products
Economical and slim, the NDR range of power ...
Description:
Economical and slim, the NDR range of power supplies (PSU) can be installed on TS-35/7.5 or TS-35/15 mounting rails and have been designed to allow space saving within cabinets. The entire series conforms to EN61000-3-2 and has been designed with metal housing enhancing the PSUs power dissipation.The entire series can ...
Economical and slim, the TDR is a 3 ...
Description:
Economical and slim, the TDR is a 3 phase power supply. It can be installed on TS-35/7.5 or TS-35/15 mounting rails and has been designed to allow space saving within cabinets. This PSU conforms to EN61000-3-2 and has been designed with metal housing enhancing the PSUs power dissipation.Due to the ...
AC-DC Industrial 3-phase DIN rail power supply with ...
Description:
AC-DC Industrial 3-phase DIN rail power supply with PFC and Constant Current, Output 24VDc at 10A, DC OK. Three-Phase 340 550VAC wide range input (dual phase operation possible)63mm slim width Built-in passive PFC function compliance to EN61000-3-2High efficiency 92% and low power dissipation Protection: short Circuit/overload/over voltage/over temperaturecooling by free ...
The single phase SITOP compact series are power ...
Description:
The single phase SITOP compact series are power supplies for the lower performance range. Thanks to the space-saving slim design, they are especially suited to distributed applications in control boxes or in small control cabinets. The SITOP compact range have low-power losses throughout the entire load range. The losses are ...