Mean Well, MDR DIN Rail Panel Mount Power Supply, 15V dc Output Voltage, 1.34A output current

  • RS Stock No. 428-417
  • Mfr. Part No. MDR-20-15
  • Warranty 3 Year
  • Brand Mean Well
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Mean Well MDR Series Single Output DIN Rail Power Supply

A range of ultra slim single output DIN Rail power supplies with short circuit, overload and over voltage protection. These PSUs can be installed on DIN Rail TS-35/7.5 or 15 and offer cooling by free air convection.

Features and Benefits

Universal AC input/Full range Protections: Short circuit/Overload/Over voltage
Cooling by free air convection
Can be installed on DIN Rail TS-35/7.5 or 15
DC OK relay contact
LED indicator for power-on
No load power consumption <0.75 W
100% full load burn-in test
3 years warranty
Class 1, Div 2 hazardous locations T4

Why use a DIN Rail Power Supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC/DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids and relays.

Points to Consider When Buying a DIN Rail Power Supply

DIN Rail size– There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection Types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Standards

UL508, UL60950-1, TUV EN60950-1, Class I, Div. 2 Group A, B, C, D Hazardous Locations T4, EAC TP TC 004, BSMI CNS14336-1 approved

Specifications
Attribute Value
Input Voltage 85 → 264 V ac, 120 → 370 V dc
Output Voltage 15 V dc
Output Current 1.34 A
Power Rating 20W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 100mm
Width 22.5mm
Ripple And Noise 120mV Pk-Pk
Standards Met RoHS Compliant, TUV EN 60950-1, UL 508
Series MDR
Depth 90mm
Minimum Temperature -20°C
Mounting Type DIN Rail
Load Regulation ±1%
MTBF 236900h
Output Voltage Adjustment Range 13.5 → 16.5V
Maximum Temperature +70°C
Special Features Overvoltage and Short Circuit Protection
86 In stock for FREE next working day delivery
Price Each
£ 22.56
(exc. VAT)
£ 27.07
(inc. VAT)
Units
Per unit
1 +
£22.56
Related Products
The TBLC series DIN Rail mounting power supplies ...
Description:
The TBLC series DIN Rail mounting power supplies are designed for industrial and residential applications. They are lower cost than the existing TBL range, with similar electrical specifications. Also, they fully comply to the new standby power and efficiency requirements (ECO Standard). They are intended for connecting as Class II ...
Omron S8VK-X Switch mode power supply is a ...
Description:
Omron S8VK-X Switch mode power supply is a small power supply with communication abilities. The space saving design allows you to mount power supplies side by side replacing standard power supplies. The S8VK-X03005-EIP is EtherNet/IP, Modbus TCP-compatible plus using a monitoring tool connected to a personal computer, via an Ethernet ...
The TBL series is a new range of ...
Description:
The TBL series is a new range of small DIN-rail mount power supplies which have been designed particularly with building and factory automation applications in mind. The ultra-compact low profile cases fit in the standardised wall mounted control panels used in the building automation industry. Low profile caseSafety class II ...
DIN rail power supplies for industrial control automation ...
Description:
DIN rail power supplies for industrial control automation with universal input, short circuit protection and internal input filter. Universal mains input & 90 - 375Vdc, 90 - 264VacSpring terminal type or screw terminal type (A suffix) availableFront Vout adjustmentRegulated outputs-40°C to +71°C operation3 year warranty.