Get smooth-and-steady power delivery to your pneumatic flow control unit with this solenoid valve connector from Belden Hirschmann. Its robust tin contact surface resists corrosion, so the unit stands up to harsh conditions. Thanks to its threaded design, mounting is a simple matter of screwing it down to make sure it holds on tightly to your port. Tough and thermal-resistant PA housing means you can be sure this is an option that holds its own in challenging conditions.

• Current rating of 16A to withstand high-power systems
• Works safely in a wide temperature range between -40ºC and +125ºC

• Chemical plants
• Oil and gas industry
• Hydraulic equipment

It accepts wires with diameters from 4.5 to 7mm, so it's compatible with commonly used conductors.

Type A DIN 43650 Hirschmann

A comprehensive range of cable sockets, appliance connector bases and accessories typically for use with solenoid valves on pneumatic and hydraulic equipment. The inner connector can be rotated through 90° increments so the gland can be positioned in all four directions. Housing material is glass-filled nylon making them impact resistant.,All Hirschmann appliance connectors feature terminals that can be screwed onto bare or ferruled conductors, or will accept crimp ring/fork terminals under the head of the screw.,All are supplied complete with centre retaining screw, while plug bases are solder terminated and supplied with fixing screws. Suitable gasket to provide IP65 sealing, stock-no. 156-4729. Supplied in bags of 10