DSPIC33FJ128GP802-E/MM Microchip DSPIC, 16bit Digital Signal Processor 40MHz 128 kB Flash 28-Pin QFN
- RS Stock No.:
- 177-1800
- Mfr. Part No.:
- DSPIC33FJ128GP802-E/MM
- Brand:
- Microchip
Available to back order for despatch when stock is available
Added
Price Each (In a Pack of 2)
£4.38
(exc. VAT)
£5.26
(inc. VAT)
| Units | Per unit | Per Pack* |
| 2 + | £4.38 | £8.76 |
| *price indicative | ||
- RS Stock No.:
- 177-1800
- Mfr. Part No.:
- DSPIC33FJ128GP802-E/MM
- Brand:
- Microchip
Technical Reference
Legislation and Compliance
Product Details
dsPIC33Fs are designed to execute digital filter algorithms and high-speed precision digital control loops, ideal for applications that need to perform under pressure
Operating Range:
Up to 40 MIPS operation (at 3.0-3.6V)
3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPSmodules) with I/O interface to simple codecs
I2C™ with Full Multi-Master Slave mode support, slave address masking, 7-bit and 10-bit addressing, integrated signal conditioning and bus collision detection
UART (up to two modules) with LIN bus support, IrDA® and hardware flow control with CTS and RTS
Enhanced CAN (ECAN) module (1 Mbaud) with 2.0B support
Parallel Master Slave Port (PMP/EPSP)
Programmable Cyclic Redundancy Check (CRC)
Debugger Development Support
In-circuit and in-application programming
Two program breakpoints
Trace and run-time watch
Up to 40 MIPS operation (at 3.0-3.6V)
3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPSmodules) with I/O interface to simple codecs
I2C™ with Full Multi-Master Slave mode support, slave address masking, 7-bit and 10-bit addressing, integrated signal conditioning and bus collision detection
UART (up to two modules) with LIN bus support, IrDA® and hardware flow control with CTS and RTS
Enhanced CAN (ECAN) module (1 Mbaud) with 2.0B support
Parallel Master Slave Port (PMP/EPSP)
Programmable Cyclic Redundancy Check (CRC)
Debugger Development Support
In-circuit and in-application programming
Two program breakpoints
Trace and run-time watch
Specifications
Attribute | Value |
|---|---|
| Maximum Frequency | 40MHz |
| Series | DSPIC |
| Device Million Instructions per Second | 40MIPS |
| Data Bus Width | 16bit |
| RAM Size | 16 kB |
| Instruction Set Architecture | Modified Harvard |
| Program Memory Size | 128 kB |
| Program Memory Type | Flash |
| Numeric and Arithmetic Format | ALU |
| Mounting Type | Surface Mount |
| Package Type | QFN |
| Pin Count | 28 |
| Typical Operating Supply Voltage | 3.6 V |
| Number of UART Channels | 2 |
| Number of I2C Channels | 1 |
| Timers | 1 (2 x 32 bit), 1 (5 x 16 bit) |
| Width | 6mm |
| Number of Timers | 2 |
| Dimensions | 6 x 6 x 0.95mm |
| Number of SPI Channels | 2 |
| Maximum Operating Temperature | +125 °C |
| Pulse Width Modulation | 1 (4 Channel) |
| Number of ADC Units | 1 |
| ADC Channels | 10 |
| ADC Resolution | 12bit |
| Minimum Operating Temperature | -40 °C |
| ADCs | 1 (10 x 12 bit) |
| Length | 6mm |
| Automotive Standard | AEC-Q100 |
| Number of PWM Units | 1 |
| Timer Resolution | 16 bit, 32bit |
| Height | 0.95mm |
| PWM Channels | 4 |
| Number of CAN Channels | 1 |