MCP4151-103E/P, Digital Potentiometer 10kΩ 257-Position Linear Serial-SPI 8 Pin, PDIP

  • RS Stock No. 723-9930
  • Mfr. Part No. MCP4151-103E/P
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MCP413x/415x/423x/425x Digital Potentiometers

The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers that feature a SPI interface. On board is volatile RAM memory.

7-bit (129 steps) and 8-bit (257 steps) versions are available in various RAB resistance options from 5 kΩ to 100 kΩ. Further variants also give the choice between Rheostat and Potentiometer pinouts, Single and Dual Resistor Network options are also available.


Zero Scale to Full-Scale Wiper Operation
Low Wiper Resistance: 75 Ω (typical)
Low Temperature Coefficient: Absolute (Rheostat) 50 ppm, Ratiometric (Potentiometer) 15 ppm (typical)
SPI Serial Interface
Resistor Network Terminal Disconnect Feature
Brown-Out Reset Protection: 1.5 V (typical)
Serial Interface Inactive Current: 2.5 μA (typical)
High-Voltage Tolerant Digital Inputs: Up to 12.5 V
Supports Split Rail Applications
Internal Weak Pull-Up on all Digital Inputs
Wide Operating Voltage: 1.8 V to 5.5 V
Wide Bandwidth (-3 dB) Operation: 2 MHz for 5.0 kΩ device (typical)

Model Variants

Potentiometer Wiper Configuration: MCP4131, MCP4151, MCP4231, MCP4251
Rheostat Wiper Configuration: MCP4132, MCP4152, MCP4232, MCP4252

Single Resistor Network: MCP4131, MCP4132, MCP4151, MCP4152
Dual Resistor Network: MCP4231, MCP4232, MCP4251, MCP4252

7-bit, 128 Resistors (129 steps): MCP4131, MCP4132, MCP4231, MCP4232
8-bit, 256 Resistors (257 steps): MCP4151, MCP4152, MCP4251, MCP4252

Digital Potentiometer - Microchip

Attribute Value
Control Interface Serial-SPI
Resistance Value 10kΩ
Number of Positions 257
Taper Type Linear
Memory Type Volatile
Number of Pots per Package 1
Mounting Type Through Hole
Package Type PDIP
Pin Count 8
Power Supply Type Single
Typical Single Supply Voltage 1.8 to 5.5 V
Dimensions 0.4 x 0.28 x 0.195in
Height 4.95mm
Width 0.28in
Length 10.16mm
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
62 In stock for FREE next working day delivery
Price Each (In a Pack of 2)
£ 0.75
(exc. VAT)
£ 0.90
(inc. VAT)
Per unit
Per Pack*
2 - 8
10 - 22
24 - 98
100 +
*price indicative
Packaging Options:
Related Products
The ADu CM360 is a 3.9k SPS, 24-bit data acquisition system that incorporates dual multichannel sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), an ARM Cortex-M3 core processor and memory on a single chip. The ADu CM361 has a single ADC. 2 x 24-bit multichannel Σ-Δ ADCs, ADC0 and ADC1 (ADu CM360) with ...
256 position10 kΩ, 50 kΩ, 100 kΩ+20 V to +30 V single-supply operation±10 V to ±15 V dual-supply operation 3-wire SPI®-compatible serial interface Low temperature coefficient 35 ppm/°C typical THD 0.006% typical Midscale preset Compact MSOP-10 package Automotive temperature range: −40°C to +125°Ci CMOS™1 process technology ApplicationsHigh voltage DACProgrammable power ...
Two 256-Step (or 8-Bit) Digital Potentiometers Stacking Configures ...
Two 256-Step (or 8-Bit) Digital Potentiometers Stacking Configures Device as One 512-Step (or 9-Bit) Digital Potentiometer Wipers Digitally Set and Read Through Serial Port3-Wire Serial Control Interface Operating Ranges Single +5V or ±5V Supplies-40°C to +85°C Applications Impedance Matching Mechanical Potentiometer Replacement Offset and Gain Control Programmable Filters, Delays, Time ...
The DS3903 contains three nonvolatile (NV) low temperature ...
The DS3903 contains three nonvolatile (NV) low temperature coefficient digital potentiometers, which can be accessed through a 2-wire bus. The DS3903 operates in both 3V and 5V systems, and it features a write-protect pin that can lock the positions of the potentiometers. An address pin allows two DS3903s to be ...