MCP45HV51-104E/ST, Digital Potentiometer 100kΩ 256-Position Linear Serial-I2C 14 Pin, TSSOP

  • RS Stock No. 165-4162
  • Mfr. Part No. MCP45HV51-104E/ST
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

MCP45HVx1 Digital Potentiometers

The MCP45HVx1 family of devices from Microchip are Digital Potentiometers with an SPI Interface and on board Volatile Memory. The device family has dual power rails, one analogue one digital. The Analogue power rail can handle up to +36 V and can be implemented as a dual rail (±18 V) relative to the digital logic ground.

The MCP45HVx1 has a Write Latch (WLAT) function that inhibits the volatile wiper register from being updated (latched) with received data until the WLAT pin is low. This allows the specification of a condition where the volatile wiper register is updated (such as zero crossing).

Features

High-Voltage Analogue Support: +36 V terminal voltage range (DGND = V-), ±18 V terminal voltage range (DGND = V- +18 V)
Wide Operating Voltage: Analogue 10 V to 36 V, Digital 2.7 V to 5.5 V or 1.8 V to 5.5 V (DGND ≤ V- +0.9 V)
Single Resistor Network
Resistor Network Resolution: 7-bit: 127 resistors (128 Taps) or 8-bit: 255 resistors (256 Taps) – model dependant
High Terminal/Wiper Current (IW) Support: 25 mA for 5 kΩ, 12.5 mA for 10 kΩ and 6.5 mA for 50 kΩ and 100 kΩ
Zero-Scale to Full-Scale Wiper Operation
Low Wiper Resistance: 75 Ω (typical)
Low Temperature Coefficient: Absolute (Rheostat) 50 ppm, Ratiometric (Potentiometer) 15 ppm (typical)
SPI Serial Interface
Resistor Network Terminal Disconnect via Shutdown pin (SHDN) or Terminal Control (TCON) register
Write Latch (WLAT) Pin to Control Update of Volatile Wiper Register (such as Zero Crossing)
Power-on Reset/Brown-out Reset for Digital and Analogue Supply
Serial Interface Inactive Current (3 μA Typical)
500 kHz Typical Bandwidth (-3 dB) Operation (5.0 kΩ Device)

Digital Potentiometer - Microchip

Specifications
Attribute Value
Control Interface Serial-I2C
Resistance Value 100kΩ
Number of Positions 256
Taper Type Linear
Memory Type Volatile
Number of Pots per Package 1
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 14
Power Supply Type Single
Typical Single Supply Voltage 1.8 → 5.5 (Digital) V, 10 → 36 (Analogue) V
Dimensions 5.1 x 4.5 x 1.05mm
Height 1.05mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Width 4.5mm
Length 5.1mm
Available to back order for despatch 10/03/2020
Price Each (In a Tube of 96)
£ 0.972
(exc. VAT)
£ 1.166
(inc. VAT)
Units
Per unit
Per Tube*
96 - 96
£0.972
£93.312
192 +
£0.882
£84.672
*price indicative
Related Products
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range ...
Description:
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers with a SPI interface and EEPROM memory.Featured is Wiper Lock Technology, providing a method of ’locking’ the wiper configuration. To unlock a high-voltage command is required (>8.5 V), protecting the setting during normal operation.7-bit (129 steps) and ...
The MCP444x/446x series of devices from Microchip are ...
Description:
The MCP444x/446x series of devices from Microchip are Digital Potentiometers with non-volatile memory that are programmed via an I2C interface. These Digital POTs include Microchip’s Wiper Lock™ Technology which allows the wiper setting to be locked in place, protecting the wiper configuration from corruption.MCP4441/MCP4461 devices are configured as Potentiometers, MCP4442/MC4462 ...
AD5280: 1 channel AD5282: 2 channels256 positions+10 V ...
Description:
AD5280: 1 channel AD5282: 2 channels256 positions+10 V to +15 V single supply, ±5.5 V dual-supply operation Fixed terminal resistance: 20 kΩ, 50 kΩ, 200 kΩLow temperature coefficient: 30 ppm/°CPower-on midscale preset1Programmable reset Operating temperature: −40°C to +85°CI2C-compatible interface ApplicationsMultimedia, video, and audio CommunicationsMechanical potentiometer replacement Instrumentation: gain, offset adjustment ...
Replaces Potentiometers In New Designs10K, 50K & 100K ...
Description:
Replaces Potentiometers In New Designs10K, 50K & 100K Ω End-to-End Terminal Resistances+2.7 to +5.5 V Single-Supply±3 V Dual Supply3-Wire SPI Compatible Serial Data Input and Output Specified for Operation: -40°C to 125°CApplications Mechanical Potentiometer Replacement Stereo Channel Audio Level Control Instrumentation: Gain, Offset Adjustment Programmable Voltage-to-Current Conversion Programmable Filters, Delays, ...