MCP4151-103E/P, Digital Potentiometer 10kΩ 257-Position Linear Serial-SPI 8-Pin PDIP

  • RS Stock No. 159-7405
  • Mfr. Part No. MCP4151-103E/P
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

MCP413x/415x/423x/425x Digital Potentiometers

The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers that feature a SPI interface. On board is volatile RAM memory.

7-bit (129 steps) and 8-bit (257 steps) versions are available in various RAB resistance options from 5 kΩ to 100 kΩ. Further variants also give the choice between Rheostat and Potentiometer pinouts, Single and Dual Resistor Network options are also available.

Features

Zero Scale to Full-Scale Wiper Operation
Low Wiper Resistance: 75 Ω (typical)
Low Temperature Coefficient: Absolute (Rheostat) 50 ppm, Ratiometric (Potentiometer) 15 ppm (typical)
SPI Serial Interface
Resistor Network Terminal Disconnect Feature
Brown-Out Reset Protection: 1.5 V (typical)
Serial Interface Inactive Current: 2.5 μA (typical)
High-Voltage Tolerant Digital Inputs: Up to 12.5 V
Supports Split Rail Applications
Internal Weak Pull-Up on all Digital Inputs
Wide Operating Voltage: 1.8 V to 5.5 V
Wide Bandwidth (-3 dB) Operation: 2 MHz for 5.0 kΩ device (typical)

Model Variants

Potentiometer Wiper Configuration: MCP4131, MCP4151, MCP4231, MCP4251
Rheostat Wiper Configuration: MCP4132, MCP4152, MCP4232, MCP4252

Single Resistor Network: MCP4131, MCP4132, MCP4151, MCP4152
Dual Resistor Network: MCP4231, MCP4232, MCP4251, MCP4252

7-bit, 128 Resistors (129 steps): MCP4131, MCP4132, MCP4231, MCP4232
8-bit, 256 Resistors (257 steps): MCP4151, MCP4152, MCP4251, MCP4252

Digital Potentiometer - Microchip

Specifications
Attribute Value
Control Interface Serial-SPI
Resistance Value 10kΩ
Number of Positions 257
Taper Type Linear
Memory Type Volatile
Number of Pots per Package 1
Mounting Type Through Hole
Package Type PDIP
Pin Count 8
Power Supply Type Single
Typical Single Supply Voltage 1.8 → 5.5 V
Dimensions 0.4 x 0.28 x 0.195in
Height 4.95mm
Width 0.28in
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Length 10.16mm
Available to back order for despatch 29/07/2019
Price Each (In a Tube of 60)
£ 0.59
(exc. VAT)
£ 0.71
(inc. VAT)
Units
Per unit
Per Tube*
60 - 60
£0.59
£35.40
120 +
£0.517
£31.02
*price indicative
Related Products
MCP42010-I/P | MCP42010-I/P, Digital Potentiometer 10kΩ 256-Position Linear ...
Description:
MCP42010-I/P | MCP42010-I/P, Digital Potentiometer 10kΩ 256-Position Linear 2-Channel Serial-SPI 14-Pin PDIP
MCP4651-103E/ST | MCP4651-103E/ST, Digital Potentiometer 10kΩ 256-Position 2-Channel ...
Description:
MCP4651-103E/ST | MCP4651-103E/ST, Digital Potentiometer 10kΩ 256-Position 2-Channel Serial-2 Wire, Serial-I2C 14-Pin TSSOP
The MCP444x/446x series of devices from Microchip are ...
Description:
The MCP444x/446x series of devices from Microchip are Digital Potentiometers with non-volatile memory that are programmed via an I2C interface. These Digital POTs include Microchip’s WiperLock™ Technology which allows the wiper setting to be locked in place, protecting the wiper configuration from corruption.MCP4441/MCP4461 devices are configured as Potentiometers, MCP4442/MC4462 as ...
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range ...
Description:
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers with a SPI interface and EEPROM memory.Featured is WiperLock Technology, providing a method of ’locking’ the wiper configuration. To unlock a high-voltage command is required (>8.5 V), protecting the setting during normal operation.7-bit (129 steps) and 8-bit ...