Lascar S43-RS485 , Add On Board for Current, Voltage, 75.9mm x 115.3mm

  • RS Stock No. 138-3525
  • Mfr. Part No. S43-RS485
  • Brand Lascar
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

RS485 Add-on Board for SGD 43-A

The S43-RS485 is an RS485 add-on board used as an accessory for the SGD 43-A 4.3” PanelPilotACE display module. The S43-RS485 mounts onto the rear of the SGD 43-A display module and provides a three wire RS485 interface and an optional 120 Ω terminator.

Features and Benefits

Allows RS485 communication for the SGD 43-A display
Software supports ASCII-based serial communication and Modbus (RTU) protocol

Specifications
Attribute Value
Properties Measured Current, Voltage
Cutout Height 75.9mm
Cutout Width 115.3mm
Depth 31.8mm
Minimum Temperature 0°C
Maximum Temperature +40°C
Series PanelPilotACE
20 In stock for FREE next working day delivery
Price Each
£ 15.53
(exc. VAT)
£ 18.64
(inc. VAT)
Units
Per unit
1 +
£15.53
Related Products
Indicators of N25 series are destined for measurement ...
Description:
Indicators of N25 series are destined for measurement of d.c. voltage or d.c. current, temperature from Pt100 sensors and J, K thermocouples, a.c. voltage and a.c. current. 5-digit LED display, digits of 14 mm high,Possible configuration of parameters through the PD14 programmer and the free delivered LPConfig program,precision of displayed ...
Multi-function process indicators with input signal range ±10 ...
Description:
Multi-function process indicators with input signal range ±10 Vdc, ±20 mA, potentiometer.5, 10 and 24 V sensor excitation.Easy programming using 5 keys on front panel.14 mm red LED display.Three versions:  standard, two thresholds or two thresholds + analogue output.27 pre-programmed functions accessible by 4logic inputs (functions:  tare, min., max., hold, reset, etc.).Frame ...
LCD compact digital/virtual analogue indicators with common dimensions ...
Description:
LCD compact digital/virtual analogue indicators with common dimensions requiring a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash proof protection for the units when fitted to the meter during installation. All have an operating temperature range of 0°C to 50°C unless specified otherwise. ...
The process controller Codix 565 with totaliser function ...
Description:
The process controller Codix 565 with totaliser function displays V and mA analogue input signals in high resolution. In addition it can monitor and control 2 limit values.These fast displays set new standards when it comes to user friendliness. Their easy-to-read 14-segment LED display, easy-to- understand running help texts and ...