Curtis LED Battery Meter 12V dc

  • RS Stock No. 533-4207
  • Mfr. Part No. 906T12BNBGN
  • Brand Curtis
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

Model 906 LED Battery Status Meter

Solid-state, compact one-piece unit
10 bar LED display
Single flashing LED signal for low battery energy reserve alert at 70% discharge
Alternate flashing LED’s alert for battery empty status at 80% discharge
Two reset methods: Open Circuit Reset (OCR) – upon reconnection to battery when cell voltage ≥2.09V; High Voltage Reset (HVR) – when unit measures 2.35V/cell for 6 continuous minutes
4.8mm tab terminals
Used typically in small electric motors

Applications:

Golf cars
Commercial cleaning equipment
Mobility aids
Electric bicycles
Electric marine motors
Medical devices

Specifications
Attribute Value
Battery Voltage 12V dc
Cutout Height 31.2mm
Cutout Width 53.2mm
Display Type LED
Depth 28.8mm
Available to back order for despatch 20/02/2020
Price Each
£ 44.71
(exc. VAT)
£ 53.65
(inc. VAT)
Units
Per unit
1 - 4
£44.71
5 - 9
£43.36
10 +
£42.37
Related Products
All have an operating temperature range of -20 ...
Description:
All have an operating temperature range of -20 to +40°C. For use with dc and rectified ac only Suppressed zero scale Coloured zones monitor state of battery charge Snap-in panel fixing Electrical connections 25mm x 1/4in spade terminals, push-on connectors or solder terminals.
Trumeter APM meters are the most visible, easy ...
Description:
Trumeter APM meters are the most visible, easy to use, multi-format, programmable panel meters on the market.The APM Shunt Meter is ideal for use in a range of applications where accurate DC current measurement is required. The programmable scale and custom annunciators mean that users can tailor the meter to ...
Using CMS-700 it is possible to measure and ...
Description:
Using CMS-700 it is possible to measure and calculate electrical parameters from both the mains and the branches, in order to provide the most comprehensive set of information on the system.A maximum of 3x32 sensors can be connected to the CMS-700, allowing to simultaneously obtain AC and DC current as ...
Easy installation, electronic energy meter with electronic display ...
Description:
Easy installation, electronic energy meter with electronic display for installations up to 63AIntegral current transformer enables line and neutral cables to be fed through the meter body Two insulation-piercing screws permit voltage measurement Connection points can be sealed to prevent tampering Either DIN rail mounting or direct to a switchboard ...