Aim-TTi 1908 Bench Digital Multimeter With RSCAL calibration , 10A ac 1000V ac 10A dc 1000V dc 1kΩ

  • RS Stock No. 123-8855
  • Mfr. Part No. 58122-0940
  • Brand Aim-TTi
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Aim-TTi 1908 Series Dual Measurement Bench Multimeter

Aim-TTi 1908 Series is a dual measurement, dual display bench-top/portable multimeter. It features continuity and diode test, automatic or manual ranging, linear scaling with offset, dB measurements, limits comparison, percentage deviation (%), min-max storage, power measurement in watts or VA, automatic data logging and external triggering. Model 1908P can be remotely controlled via its RS232, USB, GPIB or LAN interface. Model 1908 (non ’P’) can only be controlled via USB.

Versatility

Most bench multimeters require AC power, the 1908 can operate on batteries. The batteries are charged from the internal power supply and can give more than 35 hours of operation. This enables this multimeter to be portable into locations without needing to find an AC line.
The 1908 provides precision measurements, that some hand held portable multimeters may not be up to the task. Being fully portable, highly accurate, but it also has a built-in data logging for remote locations.

Dual Display and Measuring

The 1908 features a main display and secondary display, used various purposes: Displaying a measurement together with the selected range (e.g. 100 V dc).
Displaying two different units of a measurement (e.g. Ac volts and dBm).
Displaying the result of a calculated function (Value and % deviation).
Measuring and displaying two parameters of one signal (e.g. ac and dc volts).
Measuring and displaying two different signals (e.g. ac volts and dc current).

Automatic data logging

The 1908 can store up to 500 readings at any required time, from one reading per second to one reading every three hours. A simple recall sequence allows the readings to be scrolled onto the display whenever required. Alternatively results can be downloaded using the remote interfaces.

Safety

The 1908 has extensive protection against damage from accidental overloads on all ranges including 10 Amps. They also meet stringent safety requirements of EN61010-1 2010 and EN61010-2-030 2010 for measurements up to 300 V (Cat III), 600 V (Cat II) or 100Vdc/750Vac (for circuits isolated from AC line).

Features and Benefits

Affordable 5.5 digit high performance bench/portable multimeter, 120 000 counts Dual display (main display and secondary display) and dual measurement capability
Mains power or Internal rechargeable batteries for true portability
High accuracy and resolution 0.02%, 1 μV, 0.1 μA, 1 mΩ
Manual or Auto-ranging
True RMS AC and AC+DC measurement
DC and AC volts, DC and AC current, resistance, capacitance, frequency, and temperature measurement
Measurement post-processing
Continuity and diode checks
Two or four wire selectable ohms measurement
Display nulling and ohms null
Selectable measurement speed
Touch hold mode - holds onto a stable reading until updated
500 point data logger with timer
Temperature measurement for PT100 or PT1000 sensors
Wide range of computing functions e.g. Ax + B
External input/output remote triggering
Closed case calibration
USB interface standard
Kensington security slot incorporated
Dimensions 250 x 97 x 295 mm
Weight 3.2 kg

Note

In dual measurement mode a completely independent but complementary measurement can be made and displayed on the secondary display. The two independent measurements are made alternately, not simultaneously, and the display update rate for each measurement is consequently reduced (this is not the same as dual display mode, where both a measurement and a modified version of that measurement are displayed e.g. ac Volts and the dB equivalent).

Standards

EN61010-1, EN61010-2-030 & EN61010-2-033, EN61326-1 EMC

Supplied with

IVI driver, LV/CVI driver, USB driver

Specifications
Attribute Value
Multimeter Type Bench
Absolute Maximum AC Current Measurement 10A ac
Absolute Maximum DC Current Measurement 10A dc
Calibrated RSCAL
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum AC Voltage Measurement 1000V ac
Absolute Maximum Resistance Measurement 1kΩ
Absolute Maximum Capacitance Measurement 100µF
Absolute Maximum Temperature Measurement +400°C
Functions Measured AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance, Temperature
True RMS Yes
Maximum Frequency 100kHz
Display Type LCD
Model Number p 1908
DC Current Measurement Resolution 100nA
AC Current Measurement Resolution 100nA
AC Voltage Measurement Resolution 1µV
Resistance Measurement Resolution 1mΩ
DC Voltage Measurement Resolution 1µV
Temperature Measurement Resolution 0.1°C
Capacitance Measurement Resolution 10pF
Battery Life >20 (Enabled Backlight) h, >35 (Disabled Backlight) h
Length 260mm
Best DC Current Accuracy 0.05 %
Width 235mm
Best Temperature Measurement Accuracy 0.05 %
Battery Type Rechargeable NiMH
Minimum Operating Temperature +5°C
Safety Category Level CAT II
Best DC Voltage Accuracy 0.02 %
Maximum Operating Temperature +40°C
Best AC Current Accuracy 0.35 %
Best AC Voltage Accuracy 0.3 %
Best Capacitance Measurement Accuracy 2 %
Best Resistance Measurement Accuracy 0.05 %
Height 88mm
Weight 2kg
Safety Category Voltage 600V
Dimensions 260 x 235 x 88mm
6 In stock for delivery within 2 working days
Price Each
£ 497.00
(exc. VAT)
£ 596.40
(inc. VAT)
Units
Per unit
1 +
£497.00
Not available for guaranteed pre 9am/10am delivery
Related Products
RS PRO IDM103N digital multimeters are handheld devices ...
Description:
RS PRO IDM103N digital multimeters are handheld devices which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.This digital multimeter offers high specification performance with 4000 Count display and 42 segment bar graph.RS ...
RS PRO IDM106N offers high specification performance with ...
Description:
RS PRO IDM106N offers high specification performance with 4000 count display and 42 segment bar graph. These handheld devices can measure capacitance, voltage, electrical current, frequency, peak hold, temperature and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.RS PRO ...
RS PRO IDM-8300 Series bench digital multimeters (DMM) ...
Description:
RS PRO IDM-8300 Series bench digital multimeters (DMM) include 50 000 counts, VF (vacuum fluorescent) dual-display, 0-02% basic DC voltage accuracy and a USB protocol connector. These features provide users with measurement precision, comprehensive data observation and the convenience of a connection to a PC.RS PRO IDM-8300 Series models IDM-8341 ...
The 2001 offers measurement technology which makes them ...
Description:
The 2001 offers measurement technology which makes them attractive options to higher-priced, high-end digital multimeters. Other 7 or 8 digit DMMs may average multiple readings to extend their resolution. The resolution specifications of the 2001 is based on a 28-bit A/D converter that provides the resolution needed to discern smaller ...