Georg Fischer ABS 10bar Diaphragm Valve, 29.514.510 3/4

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CH
Product Details

Type 514 ABS Diaphragm Valves

Type 514 are a new generation of ABS diaphragm valves with solvent cement sockets from GF Piping Systems, It sets new standards regarding safety, efficiency and simplicity.
Instead of the commonly used four metal screws it has a central union nut - this non-corrosive connection is characterised by homogeneous temperature behaviour, an even surface pressure and high pressure rating up to 16 bar. The optimal flow geometry offers double flow with same energy expenditure. With almost linear flow characteristics this guarantees stable processes.
Beyond that the weir of the branched valve has been moved directly to the pipe wall of the main line. Therefore dead leg was reduced to an absolute minimum and thus the hygiene was increased at the same time.
Standard equipment like a lockable handwheel, a two-coloured indicator and an interface for a self-adjusting limit switch set new standards in terms of user-friendliness.

Fields of Application:
Chemical Process Industry
Life Science
Microelectronics
Water Treatment
Food and Beverage
Measurement and Control
Applications with high viscosity and solid content

Double flow rate compared to predecessor
One housing nut replaces four screws compared to predecessor
Handwheel with built-in locking mechanism
For easy installation and removal
Short overall length

Diaphragm Valves - PVC-U and ABS

10 bar Working Pressure at 20°C.,Hand wheel controlled, EPDM Diaphragm, M6 thread mounting hole.

Specifications
Attribute Value
Attachment Type Socket
Pipe Diameter 3/4in
Body Material ABS
Connection 3/4 in Socket
Pressure Rating 10bar
Flow Factor Kv 271L/min
Maximum Operating Temperature +60°C
Minimum Operating Temperature -40°C
Operating Temperature Range -40 → +60 °C
3 In stock for FREE next working day delivery
Price Each
£ 105.28
(exc. VAT)
£ 126.34
(inc. VAT)
Units
Per unit
1 - 4
£105.28
5 +
£102.06
Related Products
WRAS approved water management system that complies with ...
Description:
WRAS approved water management system that complies with Bylaw 82 and 83ABS body PIR sensor 54μA (nominal current), 750mA (peak current for 50ms), 6Vdc (Voltage)Sensor range 3m – 4m Field of view 138º (horizontal), 125º (vertical)Infrared sensor unit may be fitted directly onto solenoid valve assembly, if battery powered, or ...
The introduction of this 3 way rotary shoe ...
Description:
The introduction of this 3 way rotary shoe valve from Schneider Electric is part of the MB range. It can be used in a wide range of applications such as heating, cooling, Air Conditioning systems. Characteristics include mixing or diverting valves for hot and chilled water. The qualities of components ...
Festo VZXF series tough and durable angle seat ...
Description:
Festo VZXF series tough and durable angle seat valves for process automation applications. Perfect for all tasks involving the control of media flows, whether contaminated or highly viscous. The VZXF controls gaseous or fluid material flows in both closed and open circuits. Suitable for most media with a viscosity of ...
2/2- way pneumatically operated angle seat valves. Available ...
Description:
2/2- way pneumatically operated angle seat valves. Available in both NO (Normally Open) and NC (Normally Closed) configurations and with the flow direction above or below the seat For use with neutral gases, air, steam, water and oil. 2//2-way, normally closed by spring action Polyamide actuator casing and PTFE seal ...