Development Kit Driver IC for use with Brushed DC Motor, Driving a Stepper Motor, Motor Driver Applications, Relay

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Supports up to 20V Output Pull-up Voltage
–40°C to 125°C Operating Temperature Range
Supports Wide Range of Stepper Motors, DC Motors, Relays, and Inductive Coils
Low Output VOL of 0.4V (Typical) With
– 140mA Current Sink per Channel at 5.0V Logic Input(1)
– 1A Current Output when all 7 Channels
Tied in Parallel(1)
Compatible to 1.8V, 3.3V and 5.0V Micro- controllers and Logic Interface
Internal Free-wheeling Diodes for Inductive Kick-back Protection
Input Pull-down Resistors Allows Tri-stating the Input Driver
Input RC-Snubber to Eliminate Spurious Operation in Noisy Environment
Low Input and Output Leakage Currents
Easy to use Parallel Interface
– 2kV HBM, 500V CDM
APPLICATIONS
Unipolar Stepper Motor Drivers
Relay and Inductive Load Drivers
Solenoid Drivers
Lamp and LED Displays
Logic Level Shifter
General Low-Side Switch Applications

Specifications
Attribute Value
Accessory Type Driver IC
For Use With Brushed DC Motor, Driving a Stepper Motor, Motor Driver Applications, Relay
9 In stock for FREE next working day delivery
Price Each
£ 8.96
(exc. VAT)
£ 10.75
(inc. VAT)
Units
Per unit
1 +
£8.96
Related Products
Industry-standard Advanced Ultra-low Power (AUP) logic family products ...
Description:
Industry-standard Advanced Ultra-low Power (AUP) logic family products for ultra-low power consumption, small footprint logic solutions for use in 1.8 V and mixed 1.8 V / 3.3 V circuit applications. The AUP logic family offers the following features:. Wide supply voltage range: 0.8 to 3.6VSchmitt-trigger inputs for high noise immunity ...
The 74LVC244A, 74LVCH244A is an octal non-inverting buffer/line ...
Description:
The 74LVC244A, 74LVCH244A is an octal non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on n OE causes the outputs to assume a high-impedance OFF-state. Schmitt-trigger action at all inputs makes the circuit highly tolerant for slower ...
3-phase 600V MOSFET and IGBT gate driver ICs ...
Description:
3-phase 600V MOSFET and IGBT gate driver ICs from Infineon based on proven existing SOI-technology. The absence of parasitic thyristor structures in these rugged devices prevents latch-up under all normal operating conditions. The drivers include under-voltage over-current detection and can be controlled by CMOS or LSTTL compatible signals down to ...
50V Floating high-side driver Drives two N-channel MOSFETs ...
Description:
50V Floating high-side driver Drives two N-channel MOSFETs in a half-bridge configuration1.5A source / 2.5A sink output current capability Internal bootstrap Schottky Diode included Undervoltage lockout for high-side and low-side drivers Delay matching maximum of 5ns Propagation delay typical of 20ns Logic input (HIN, LIN and EN) 3.3V capability Ultra ...