Development Kit PmodRF2 IEEE 802.15 RF Transceiver for use with Wireless Applications

  • RS Stock No. 184-0473
  • Mfr. Part No. 410-201
  • Brand Digilent
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The Pmod RF2 adds RF communication through the Microchip® MRF24J40 IEEE 802.15.4™ 2.4GHz RF transceiver module. By communicating with the device through SPI, users can transmit data at speeds up to 625 kbps through the ZigBee®, MiWi™, and MiWi P2P software stacks all available for download at the Microchip

Supports ZigBee, MiWi and MiWi P2P wireless networking protocols
ISM band 2.405-2.48 GHz operation
Integrated 20 MHz and 32.768 oscillator circuitry
Small PCB size for flexible designs 1.2“ ´ 0.8” (3.0 cm ´ 2.0 cm)
12-pin Pmod connector with SPI interface
Follows Digilent Pmod Interface Specification Type 2A

Specifications
Attribute Value
Accessory Type PmodRF2 IEEE 802.15 RF Transceiver
For Use With Wireless Applications
4 In stock for FREE next working day delivery
Price Each
£ 10.67
(exc. VAT)
£ 12.80
(inc. VAT)
Units
Per unit
1 +
£10.67
Related Products
TMP116 Accuracy Without Calibration:±0.2°C (max) From –10°C to ...
Description:
TMP116 Accuracy Without Calibration:±0.2°C (max) From –10°C to +85°C±0.25°C (max) From –40°C to +105°C±0.3°C (max) From +105°C to +125°CTMP116N Accuracy Without Calibration:±0.3°C (max) From –25°C to +85°C±0.4°C (max) From –40°C to +125°CLow Quiescent Current:3.5-μA, 1-Hz Conversion Cycle250-nA Shutdown Current Supply Range: 1.9 V to 5.5 VResolution: 16 Bits at 0.0078°C ...
No firmware development required Simple GUI-based configurator Integrated ...
Description:
No firmware development required Simple GUI-based configurator Integrated USB transceiver, no external resistors required Integrated clock, no external crystal required USB 2.0 full-speed compatible Data transfer rates up to 3 Mbaud USB Battery Charger Detection (USB BCS 1.2 Specification)Remote wakeup for waking a suspended host Low operating current : 9.5 ...
Supports up to 20V Output Pull-up Voltage–40°C to ...
Description:
Supports up to 20V Output Pull-up Voltage–40°C to 125°C Operating Temperature Range Supports Wide Range of Stepper Motors, DC Motors, Relays, and Inductive Coils Low Output VOL of 0.4V (Typical) With– 140mA Current Sink per Channel at 5.0V Logic Input(1)– 1A Current Output when all 7 Channels Tied in Parallel(1)Compatible ...
Output Voltages:3.2V to 12.775V and –1.2V to –13.95V ...
Description:
Output Voltages:3.2V to 12.775V and –1.2V to –13.95V (LT3582)5V and –5V (LT3582-5)12V and –12V (LT3582-12)Digitally Re-Programmable (LT3582) via I2C for:Output Voltages Power Sequencing Output Voltage Ramp Rates Power-Up Defaults Settable with Non-Volatile OTP(LT3582)I2C Compatible Interface (Standard Mode)All Power Switches Integrated350mA Current Limit (Boost)600mA Current Limit (Inverting)All Feedback Resistors Integrated Input ...