RS PRO, DC Motor Controller, Potentiometer Control, 10 → 17 V dc, 15 A, Skeleton/Boxed

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Series 2600 Reversible Motor Controller

Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors.

Operates from a battery or rectified smooth dc. supply
12 or 24V dc. supply voltage
15 or 30A current rated version
Forward and reverse direction control
Protected against short circuit to output and polarity misconnection

Adjustable up to 15 or 30A continuous rating, 27 or 56A peak
Settable presets for high or low speed, overcurrent, acceleration or deceleration
Fault indication via flashing LED for overcurrent, current tripped, low supply voltage, over temperature
Over current and thermal protection, progressive thermal shutdown

Specifications
Attribute Value
Supply Voltage 10 → 17 V dc
Current Rating 15 A
Voltage Rating 12 V
Compatible Motor Type Permanent Magnet, Shunt
Control Input Potentiometer
Mounting Style Skeleton/Boxed
Length 148mm
Width 132mm
Depth 24mm
Dimensions 148 x 132 x 24 mm
Operating Temperature Range +50 → +65 °C
Available to back order for despatch when stock is available
Price Each
£ 158.33
(exc. VAT)
£ 190.00
(inc. VAT)
Units
Per unit
1 +
£158.33
Related Products
EM-A3-10K is a control potentiometer for automation applications. ...
Description:
EM-A3-10K is a control potentiometer for automation applications. This unit has a resistor element of conductive plastic material, which offers a good long term endurance. Recommended for indoor use, but with O-ring and sealing material it can be protected against dropping water. Mechanical range 270deg.Electrical range 240deg.Slide material: conductive plastic ...
Compact non-isolated motor speed control modules for dc. ...
Description:
Compact non-isolated motor speed control modules for dc. shunt wound and permanent magnet field motors. DIN rail mounting Suitable for 110//120 or 220/240V single phase ac. supplies (switch selectable)Fully isolated heatsink Control signals available for zero speed, drive health and speed trim Adjustable speed ramp up and ramp down times ...
Cost-effective dc motor speed controllers suitable for use ...
Description:
Cost-effective dc motor speed controllers suitable for use with shunt and permanent dc motors, such as the Parvalux range. The built-in EMC and Harmonic Filters can enable a complete drive to conform with the statutory EMC and Harmonics directives. High transient overload capability Improved commutation with considerably increased brush life ...
This small set point isolator module accepts virtually ...
Description:
This small set point isolator module accepts virtually all standard industrial control voltages (i.e. 0-5V, 0-10V, 4-20mA, 0-20m A). Also incorporated are relays to control the reversing version of the low power motor controllers. Provides intrinsically safe control voltages for mains powered drives Control from external signal or internal 5Vdc ...