Amphenol, FCE17 25 Way Panel Mount D-sub Connector Plug

  • RS Stock No. 170-2677
  • Mfr. Part No. FCE17-B25PM-250
  • Brand Amphenol
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Amphenol Straight Solder Bucket Connectors

These Amphenol Filtered D-Sub FCE17 Series Straight Pin or Socket connectors are Panel mount with solder cup tails.

Filter Capacitance of 470 pF, 820 pF, 1000 pF or 5600 pF are available indicated by a 1, 4, 5 and 9 in the Manufacturers Part Number i.e. FCE17-*****-*X** respectively
Ø3 mm mounting holes with fixing centres of 25 mm, 33.3 mm, 47 mm or 63.5 mm for E09, A15, B25 and C37 sizes respectively
Solder bucket termination with Matte Tin Plating accepts wire up to 20 awg
Insulation Resistance 3000 MΩ
Contact Resistance 15 mΩ

Amphenol Filtered 'D' Connectors

These filtered connectors are compact interconnect devices that can filter unwanted EMI. The capacitors are mounted inside the connector between each of the contacts and the connector ground shell. They provide:

Better EMI Control – With minimized lead inductances and short, direct paths to ground of the filter, performance will typically out perform the same filter components on a P.C.B. by a factor of three to one
PCB Space Savings – Incorporating filter elements into the connector, enables simplification of the required filter schematic for the necessary performance plus a savings of 2-4 square inches
Cost Savings – Filter elements, such as inductors and capacitors, must no longer be purchased, stocked, assembled or tested. Fewer components means greater reliability at lower cost
Easy EMI/RFI Upgrade – These compact filtered connectors fit standard non-filtered connector footprints. For improved EMC performance, simply replace the existing connector with a filtered connector
EMC Compliance & Immunity – EMI that is generated from the electronic device, radiated or conducted, will be re-directed to chassis ground through the connector shell. This same device will also protect the system from external EMI/RFI noise (such as radio transmitters, ESD, or natural phenomena such as lightning) in the same way

Attribute Value
Number of Contacts 25
Gender Male
Body Orientation Straight
Mounting Type Panel Mount
D Connector Type Filtered D-Sub
D-Sub Shell Size B
Termination Method Solder
Current Rating 5.0A
Housing Material Steel
Length 53.04mm
Width 12.55mm
Depth 16.48mm
Dimensions 53.04 x 12.55 x 16.48mm
Series FCE17
Minimum Operating Temperature -40.0°C
Contact Plating Gold over Nickel
Contact Material Phosphor Bronze
Maximum Operating Temperature +85°C
Available to back order for despatch 13/11/2020
Price Each (In a Bag of 40)
£ 14.314
(exc. VAT)
£ 17.177
(inc. VAT)
Per unit
Per Bag*
40 - 40
80 +
*price indicative
Related Products
Compatible with MIL 24308 connectors High reliability and ...
Compatible with MIL 24308 connectors High reliability and military performance Low contact resistance Monobloc moisture resistant High temperature withstand insulator Cable/panel mount versions illustrated Original D also available in straight and 90° PCB versions For suitable hole cutters see stock no. 477-8690. D*M Connectors. ITT D Type Connectors.
From EDAC, the cable mounting rack and panel ...
From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding receptacle.Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately. • Contacts fit plug and socket• Current rating is 8.5A• Insulating resistance is 5000m ...
A range of Straight D-Sub male and female, ...
A range of Straight D-Sub male and female, through hole PCB mount, connectors. Tin-coated metal casing.Performance Level 3Machined contacts Male connectors with earth blades. Straight Sub-D in-line output connectors for soldering onto PCB.
FCI's D-Subminiature (D-Sub) connectors are part of an ...
FCI's D-Subminiature (D-Sub) connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven D-Sub connectors are one of the most popular Input/Output interconnects, addressing a wide variety of applications in telecommunications, data, consumer, industrial, military, instrumentation and medical. FCI offers a wide range of ...