ITT Cannon D-sub Connector Backshell

  • RS Stock No. 466-961
  • Mfr. Part No. 192923-5990/TST24AH00
  • Brand ITT Cannon
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): HU
Product Details

Hood (for cable shell type A)

One snaps on each side of the shell, improving appearance and giving some cable support. Ends may be secured by cable tie, lacing cord, etc

QM Range Plastic Rectangular

Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)

Specifications
Attribute Value
Body Orientation Straight
405 In stock for FREE next working day delivery
Price Each (In a Pack of 5)
£ 2.644
(exc. VAT)
£ 3.173
(inc. VAT)
Units
Per unit
Per Pack*
5 - 95
£2.644
£13.22
100 - 195
£2.382
£11.91
200 +
£2.14
£10.70
*price indicative
Related Products
"D" connectors with crimp snap-in contacts. Closed entry ...
Description:
"D" connectors with crimp snap-in contacts. Closed entry socket insulators correct misaligned pins during engagement.,Socket shells accept socket contacts and plug shells accept pin contacts. Suitable crimp tool stock no. 458-904 and extraction tool stock no. 469-500.
DA121073-165 | ITT Cannon Thermoplastic D-sub Connector Backshell, ...
Description:
DA121073-165 | ITT Cannon Thermoplastic D-sub Connector Backshell, 15 Way
For suitable hole cutters, refer to 'D' connector ...
Description:
For suitable hole cutters, refer to 'D' connector cutters (e.g. stock no. 477-8690). Rear entry release crimp contacts Plugs/shells tinned plated for shielding continuity Ratchet controlled tool available separately.
The simplest hoods, made of 2 identical shells ...
Description:
The simplest hoods, made of 2 identical shells that click into place when pressed together.No screws.Accept round cables with straight or side output, which can be fixed in place using tightening clamps.The connector mounting holes are left free, so that many different locking accessories can be used.