MAX4372FEUK+T Maxim, Current Sense Amplifier Single Differential 5-Pin SOT-23

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Current Sensing Amplifiers, Maxim Integrated

Note

Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

Specifications
Attribute Value
Power Supply Type Single
Typical Single Supply Voltage 2.7 → 28 V
Number of Channels per Chip 1
Output Type Differential
Maximum Supply Current 0.06 mA
Mounting Type Surface Mount
Package Type SOT-23
Pin Count 5
Dimensions 3 x 1.75 x 1.3mm
Height 1.3mm
Length 3mm
Maximum Operating Supply Voltage 28 V
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 2.7 V
Width 1.75mm
Available to back order for despatch 31/03/2020
Price Each (On a Reel of 2500)
£ 0.931
(exc. VAT)
£ 1.117
(inc. VAT)
Units
Per unit
Per Reel*
2500 +
£0.931
£2,327.50
*price indicative
Related Products
MAX951ESA+ | MAX951ESA+ Maxim, Comparator, Rail to Rail, ...
Description:
MAX951ESA+ | MAX951ESA+ Maxim, Comparator, Rail to Rail, Swing O/P, 22μs 8-Pin SOIC
MAX9601EUP+ | MAX9601EUP+ Maxim, Dual Comparator, Differential O/P, ...
Description:
MAX9601EUP+ | MAX9601EUP+ Maxim, Dual Comparator, Differential O/P, 0.0002μs 20-Pin TSSOP
Wide Common Mode Input Range: -0.3 to 26 ...
Description:
Wide Common Mode Input Range: -0.3 to 26 VLow Offset Voltage: ±35 μV max.Low Offset Drift: 0.5 μV/°C max.Supply Voltage: 2.2 to 26 VHigh-side current sensing for high voltage systemsLow Ohm value current sense resistorsHigh accuracy over temperature leading to better power efficiencyWide supply voltage range provides system flexibilityApplicationsPower MonitoringPower ...
Current Sensing Amplifiers have a voltage output that ...
Description:
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.