Si8920BC-IP Silicon Labs, Current Shunt Monitor Single Differential 8-Pin DIP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

Si8920 Isolated Amplifier for Current Shunt Measurement

The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.

Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.

High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.

To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.

The Si8920 is available in 4 variants:
Si8920AC-IP (RS 901-3967) with an input range of ±100 mV in a Gull-Wing DIP-8 package
Si8920BC-IP (RS 901-3976) with an input range of ±200 mV in a Gull-Wing DIP-8 package
Si8920AD-IS (RS 901-3979) with an input range of ±100 mV in a SOIC-16 package
Si8920BD-IS (RS 901-3973) with an input range of ±200 mV in a SOIC-16 package

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

Specifications
Attribute Value
Power Supply Type Single
Typical Single Supply Voltage 3 → 5.5 V
Number of Channels per Chip 2
Output Type Differential
Maximum Supply Current 5.5 mA
Mounting Type Through Hole
Package Type DIP
Pin Count 8
Dimensions 9.9 x 6.6 x 3.44mm
Height 3.44mm
Length 9.9mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 3 V
Width 6.6mm
32 In stock for FREE next working day delivery
Price Each (In a Pack of 2)
£ 3.145
(exc. VAT)
£ 3.774
(inc. VAT)
Units
Per unit
Per Pack*
2 - 8
£3.145
£6.29
10 - 48
£3.055
£6.11
50 - 98
£2.985
£5.97
100 - 248
£2.74
£5.48
250 +
£2.645
£5.29
*price indicative
Packaging Options:
Related Products
Current Sense Amplifiers accurately amplify small voltages in ...
Description:
Current Sense Amplifiers accurately amplify small voltages in the presence of large common-mode voltage.
Current and power measurement for real-time system protection, ...
Description:
Current and power measurement for real-time system protection, feedback control and high-accuracy system monitoring.
±4000 V HBM ESDHigh common-mode voltage range−2 V ...
Description:
±4000 V HBM ESDHigh common-mode voltage range−2 V to +65 V operating−5 V to +68 V survivalBuffered output voltage5 mA output drive capabilityWide operating temperature range:−40°C to +125°CRatiometric half-scale output offsetExcellent ac and dc performance1 μV/°C typical offset drift10 ppm/°C typical gain drift120 dB typical CMRR at dc80 dB typical ...
Description:
Wide Common Mode Input Range: -0.3 to 26 VLow Offset Voltage: ±35 μV max.Low Offset Drift: 0.5 μV/°C max.Supply Voltage: 2.2 to 26 VHigh-side current sensing for high voltage systemsLow Ohm value current sense resistorsHigh accuracy over temperature leading to better power efficiencyWide supply voltage range provides system flexibilityApplicationsPower MonitoringPower ...