INA170EA/250 Texas Instruments, Current Sense Amplifier Single 8-Pin MSOP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Current Sense Amplifiers Analogue Output, Texas Instruments

Current and power measurement for real-time system protection, feedback control and high-accuracy system monitoring.

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

Specifications
Attribute Value
Power Supply Type Single
Typical Single Supply Voltage 3 V, 5 V, 9 V, 12 V, 15 V, 18 V, 24 V, 28 V
Minimum CMRR 100dB
Number of Channels per Chip 1
Mounting Type Surface Mount
Package Type MSOP
Pin Count 8
Dimensions 3 x 3 x 0.97mm
Height 0.97mm
Length 3mm
Maximum Operating Supply Voltage 40 V
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 2.7 V
Maximum Operating Temperature +85 °C
Width 3mm
Price Each (On a Reel of 250)
£ 1.834
(exc. VAT)
£ 2.201
(inc. VAT)
Units
Per unit
Per Reel*
250 - 500
£1.834
£458.50
750 +
£1.674
£418.50
*price indicative
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Related Products
Current loop systems are used in electrically noisy ...
Description:
Current loop systems are used in electrically noisy industrial environments for sending analogue sensor data over long distances of 300m or more.
Current Sense Amplifiers accurately amplify small voltages in ...
Description:
Current Sense Amplifiers accurately amplify small voltages in the presence of large common-mode voltage.
Current Sensing Amplifiers have a voltage output that ...
Description:
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.
Current Sensing Amplifiers have a voltage output that ...
Description:
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.