Fluke FLUKE I310S Current Probe & Clamp, With UKAS Calibration

  • RS Stock No. 911-9620
  • Mfr. Part No. FLUKE I310S
  • Brand Fluke
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

Fluke i310s AC/DC Current Clamp

The i310s Current Clamp has been designed for use with oscilloscopes and digital multimeters for accurate nonintrusive measurement of AC, DC and complex waveform currents.

Using Hall Effect technology, the clamp can accurately measure currents up to 450 A peak over the frequency range of dc to 20 kHz
These features make it a powerful tool for use in inverters, switch mode power supplies, industrial controllers, automotive diagnostics, and other applications requiring current measurements and/or waveform analysis
Output cable and connections: Safety BNC connector supplied with safety 4 mm adapter
Power Supply: 9 V Alkaline, NEDA 1604/PP3 IEC 6LR61
Safety Standards: EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002
300 V rms Category III, Pollution Degree 2

Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website - www.fluke.co.uk/freefluke. There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only £100. For each level there is a fixed range of products to claim, based on the value of the original purchase.

Specifications
Attribute Value
Probe Type AC/DC
Calibrated UKAS
Maximum Conductor Size 19mm
Safety Category CAT III 300 V
Safety Category Level CAT III
Model Number p I310S
Best Accuracy ±1% + 300 mA
Safety Category Voltage 300V
Bandwidth 1kHz
8 In stock for delivery within 2 working days
Price Each
£ 392.00
(exc. VAT)
£ 470.40
(inc. VAT)
Units
Per unit
1 +
£392.00
Not available for guaranteed pre 9am/10am delivery
Related Products
The Tektronix current probe is a split-core probe ...
Description:
The Tektronix current probe is a split-core probe that uses both transformer and Hall Effect technology. When connected to Tektronix oscilloscopes with TEKPROBE level II, Tek Connect (w/ TCA-BNC), or Tek VPI (w/ TPA-BNC) interfaces, the probe makes current measurements and calculations simple and easy. Bandwidth is 2MHz DCRise time ...
The Tektronix current probes are created for the ...
Description:
The Tektronix current probes are created for the permanent or semi-permanent in-circuit installation. Each probe consists of a current transformer and an interconnecting cable. The current transformers have a small hole to pass a current-carrying conductor during circuit assembly. 25k Hz to 1GHz Maximum pulse current is 450m AMaximum CW ...
The PAC Series is a range of Hall-effect ...
Description:
The PAC Series is a range of Hall-effect current clamps for measuring direct and alternating currents. 2 forms are proposed to clamp cables up to 30 mm or 2x24 mm in diameter, as well as small busbars. The range comprises PAC1x models and PAC2x models for higher currents. When used ...
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10k Hz bandwidth Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable Max. conductor size 20mm dia. or 20 x 5mm bus ...