Cembre Crimp Die Set, Splice, Terminal

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): IT
Product Details

RS PRO Hydraulic Crimp Tool

RS PRO brings to you a hydraulic crimp tool, designed for industrial cable assembly applications such as car battery cables. Where conventional crimpers won’t do this tool meets the challenge and packs a real punch. This compact hand tool has the benefit of spring-loaded handles, a 180° rotational head and a selection of dies that can be advanced using only one hand leaving the other free to position the cable and connector.

Features and Benefits

• 180° rotational head
• Supplied with Die Sets
• Built-in safety valve
• Pressure release lever
• Housed in a moulded plastic carry case
• Comprehensive instructions included
• Cable Range: 6 -185 mm2
• Crimping Force: 50 kN
• Rated Operating Pressure: 600 bar (8600 psi)

What do you get?

• RS Pro Hydraulic Crimp Tool
• Die Set: 6 mm², 10 mm², 16 mm², 25 mm², 35 mm², 50 mm², 70 mm², 95 mm², 120 mm², 150 mm² and 185 mm²
• Plastic Case

RS PRO Die Sets Available Separately

• RS Stock no: 624-1358, 624-1308, 624-1336, 624-1320

Typical Applications

• Maintenance and repair
• Electrical Installations
• Cable assemblies

FAQ:
How easy are they to use?

Although this kit may look intimidating at first glance, it’s fairly simple to use. During application prepare the cable and slide on the connector, select and insert the required die, insert the cable and connector. Holding the cable in position with one hand, prime the handle until the crimp tool starts to bite, once you feel resistance you can use both hands to increase the pressure and complete the union.

How do you maintain the product?

• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Note

Compatible with RS tube terminals typically stock no. 119-160

Specifications
Attribute Value
Crimp Connector Type Splice, Terminal
Terminal Insulation Uninsulated
1 In stock - FREE next working day delivery available
Price Each
£ 37.16
(exc. VAT)
£ 44.59
(inc. VAT)
Units
Per unit
1 - 4
£37.16
5 +
£34.38
Related Products
From Klauke, a professional quality battery operated crimp ...
Description:
From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This ...
A range of XM crimp tool dies suitable ...
Description:
A range of XM crimp tool dies suitable for a wide variety of HDTV Series BNC and F Plugs when used in conjuction with the XM Type crimp tool specifically designed for use when assembling BNC and F Plugs. The XM Type crimp tool is supplied in a sturdy foam ...
A range of crimp dies for the Pressmaster ...
Description:
A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number 492-9595). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer. Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. Pressmaster Crimp Tools.
The Panduit CD-2001 range of crimp tool dies ...
Description:
The Panduit CD-2001 range of crimp tool dies for use with the Panduit CT-2001 and CT-3001 hydraulic crimp tools. These crimping dies are colour coded to provide easy matching to marked connectors. A die index number is embossed onto the connector barrels to provide post crimp inspection. CD-2001 Crimp Tool ...