Facom Hand Crimping Tool for Insulated Terminal

  • RS Stock No. 504-3260
  • Mfr. Part No. 673838
  • Brand Facom
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Crimp tool for pre-insulated terminals

Facom crimp tools are known for its durability and the highest quality. Designed with the professionals and most demanding customers in mind. The construction manufactured for lightweight yet durable materials guarantee long life and hassle-free operation. Ergonomically shaped and rubber-coated handles increases anti-slip, safety and comfort, so even longer operating is injury-free.

Features and Benefits:
• Lower fixed jaw for easy terminal fitting
• Double crimping with a visual die mark on the insulator
• Stainless steel die with 3 cavities to choose from (Red - 0.5mm to 1.5mm; Blue - 1.5mm to 2.5mm and Yellow - 4mm to 6mm)
• An automatic hold of the terminal before and after crimping.
• Designed to be used for one-handed crimping (suitable for both left and right hand)
• Automatic positioning of the terminal in the grips

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications
Attribute Value
Crimp Connector Type Insulated Terminal
Crimp Tool Type Hand
Overall Length 228mm
1 in stock for FREE next working day delivery
11 available from Europe for delivery within 1 working day(s)
Price Each
£ 69.55
(exc. VAT)
£ 83.46
(inc. VAT)
Units
Per unit
1 +
£69.55
Related Products
Ferrules available in the French colour code range ...
Description:
Ferrules available in the French colour code range in sizes 0·5 to 2·5mm².,Each pack of ferrules contain 10 strips of 50, which can be rapidly terminated with a special tool, with automatic feed action enables cables to be cut, stripped and terminated. The automatic ferrule feed action allows efficient cable ...
Multi component grip handle crimp lever tool with ...
Description:
Multi component grip handle crimp lever tool with 4 crimp positions. For use with non-insulated open plug type connectors (plug width 2.8 + 4.8 mm). Short crimp lever tools Consistently high crimp quality enabled by a precision profile and automatic lock (unlockable)Crimp pressure is precisely set in the factory (calibrated)Increased ...
The JST XA series through-hole type male connector ...
Description:
The JST XA series through-hole type male connector with a boss has 13-pin in one row with a 2.5mm pitch. It has a voltage rating of 250VAC/DC and a current rating of 3A. This device has a shroud. This connector has 1Mohm insulation resistance and can withstand up to 1000VAC/min. ...
K 30/4 K self-setting crimping tool for cable ...
Description:
K 30/4 K self-setting crimping tool for cable end-sleeves and twin cable end-sleeves 0.08 - 16 mm². Square crimping CharacteristicsOne crimping profile for cross-sections from 0.08-16 mm² due to automatic cross-section adjustment With ratchet for consistently-controlled crimp results Lateral insertion (side crimping)Positioner for small cable end-sleeves Handle with slip guard ...