Pressmaster, KAA 0760 Plier Crimping Tool for Insulated Terminal

  • RS Stock No. 267-3133
  • Mfr. Part No. 4300-2364
  • Brand Pressmaster
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Pressmaster KAA-0760 Ergonomic Hand Crimp Tool

The KAA-0760 ergonomic hand crimp tool is designed for crimping red, blue and yellow pre-insulated crimp terminals with wires of cross-section range from 0.5 to 6.0mm2. This ratchet hand crimp tool has asymmetric colour-coded die nests, a ratchet with safety release, and ergonomic handles allowing two-handed operation for a comfortable, secure crimping action.

For replacement die set see stock number 557-862

Features and Benefits:
• Non-slip main handle and low friction moving handle ensure a comfortable hand grip
• Provides two-hand grip in the final phase of crimping, increasing comfort and productivity
• Unique mechanism significantly reduces hand force requirement over competing for crimping tools
• The non-slip pad holds the tool in place when using on a work surface
• Full cycle crimp mechanism to ensure consistent, reliable crimp
• Ratchet release mechanism to clear miscrimps and obstruction
• Precision eccentric adjustment for consistent performance and ability to calibrate
• Hole in handle allows attachment of safety strap for working overhead
each tool has a unique serial number for traceability
• Durable: lifespan exceeds 50000 cycles
• High strength, through hardened alloy Swedish steel construction
• Compact size: only 255 mm of length
• Weight: 560g

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications
Attribute Value
Series KAA 0760
Crimp Tool Type Plier
Crimp Connector Type Insulated Terminal
Overall Length 255 mm
Sorry, we couldn't check our stock levels right now. Please try refreshing the page.
Price Each
£ 138.42
(exc. VAT)
£ 166.10
(inc. VAT)
Units
Per unit
1 +
£138.42
Not available for guaranteed pre 9am/10am delivery
Related Products
A range of crimp tools for crimping Han-Fast ...
Description:
A range of crimp tools for crimping Han-Fast Lock straight and angled PCB contacts onto wire. These crimp tools feature a ratchet mechanism which prevents the handles opening until the crimp cycle is complete. An emergency release lever is available to open the tool before the crimp cycle is complete ...
Application Tooling: We offer a variety of tooling ...
Description:
Application Tooling: We offer a variety of tooling to help you assemble your Discrete Wire, Accli Mate™ and RF components. These range from simple hand tools that are ideal for lower volume projects, to applicators that can be used in bench top and automatic presses for larger volumes.
TH2. Crimping of blue insulated terminals, disconnects, pins, ...
Description:
TH2. Crimping of blue insulated terminals, disconnects, pins, blades and window butt connectors from 1.0 to 2.5 mm²Aluminium body Exceptional low gearing High quality crimping by linear movement of dies Adjustable crimping of cable insulation by eccentric Safety ratchet Positioner stopper Crimping dies identification reference mark : 2 dashes.
TH1. Crimping of red insulated terminals, disconnects, pins, ...
Description:
TH1. Crimping of red insulated terminals, disconnects, pins, blades andwindow butt connectors from 0.34 to 1.5 mm²Aluminium body Exceptional low gearing High quality crimping by linear movement of dies Adjustable crimping of cable insulation by eccentric Safety ratchet Positioner stopper Crimping dies identification reference mark : 1 dash.