RS PRO Crimp Die Set, Terminal, Wire size 120 mm², 150 mm², 185 mm²

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TW
Product Details

RS PRO Hydraulic Crimp Tool

RS PRO brings to you a hydraulic crimp tool, designed for industrial cable assembly applications such as car battery cables. Where conventional crimpers won’t do this tool meets the challenge and packs a real punch. This compact hand tool has the benefit of spring-loaded handles, a 180° rotational head and a selection of dies that can be advanced using only one hand leaving the other free to position the cable and connector.

Features and Benefits

• 180° rotational head
• Supplied with Die Sets
• Built-in safety valve
• Pressure release lever
• Housed in a moulded plastic carry case
• Comprehensive instructions included
• Cable Range: 6 -185 mm2
• Crimping Force: 50 kN
• Rated Operating Pressure: 600 bar (8600 psi)

What do you get?

• RS Pro Hydraulic Crimp Tool
• Die Set: 6 mm², 10 mm², 16 mm², 25 mm², 35 mm², 50 mm², 70 mm², 95 mm², 120 mm², 150 mm² and 185 mm²
• Plastic Case

RS PRO Die Sets Available Separately

• RS Stock no: 624-1358, 624-1308, 624-1336, 624-1320

Typical Applications

• Maintenance and repair
• Electrical Installations
• Cable assemblies

FAQ:
How easy are they to use?

Although this kit may look intimidating at first glance, it’s fairly simple to use. During application prepare the cable and slide on the connector, select and insert the required die, insert the cable and connector. Holding the cable in position with one hand, prime the handle until the crimp tool starts to bite, once you feel resistance you can use both hands to increase the pressure and complete the union.

How do you maintain the product?

• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Note

Compatible with RS tube terminals typically stock no. 119-160

Specifications
Attribute Value
Crimp Connector Type Terminal
Minimum Wire Size mm² 120mm²
Wire Size 120 mm², 150 mm², 185 mm²
Maximum Wire Size mm² 185 mm²
Terminal Insulation Uninsulated
3 In stock for FREE next working day delivery
Price Each
£ 98.98
(exc. VAT)
£ 118.78
(inc. VAT)
Units
Per unit
1 - 4
£98.98
5 - 24
£84.14
25 +
£69.30
Related Products
The Provertha crimp die set is a safe ...
Description:
The Provertha crimp die set is a safe and easy application for crimping pliers TMC DC. • Easy crimp insert change for different cable diameters• Fitting crimp insert for every crimp sleeve version• Special crimp inserts upon request.
High quality die sets for use with the ...
Description:
High quality die sets for use with the universal crimp tool frame stock no. 848-391. The die sets are identified with the appropriate cable group in the price table. The &146;Cable Group to Cable Type Relationship&146; table lists the relevant cable types.
Crimp die set for system tool KNIPEX 97 ...
Description:
Crimp die set for system tool KNIPEX 97 43 200 (stock no. 336-8084)For rolled contacts, 0.14 → 1.5 mm2, AWG 25-16, PEW 12.52For roll crimping conductors and insulation in one operationAvailable bronzed, for installation in the system tool 97 43 200With three profiles for: 0.14 → 0.25 mm20.3 → 0.5 ...
A Semi-professional ratchet hand tool for crimping shield ...
Description:
A Semi-professional ratchet hand tool for crimping shield rings / ferrules of shielded Bel Stewart connectors. See part number 290-4780 typically. The ferrule die sets are easily changed to suit individual cable diameters. Die sets for 5.2 mm and 6.0 mm diameter cables are available separately. Part number 290-4875 – ...