JST STO Series Insulated, Straight Mount Angle Crimp Tab Terminal, 0.5mm² to 1mm², 20AWG to 18AWG, 3.7 x 0.5mm Tin

  • RS Stock No. 163-0341
  • Mfr. Part No. STO-1.0T-110N-5
  • Brand JST
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details
Specifications
Attribute Value
Series STO
Insulation Insulated
Minimum Wire Size mm² 0.5mm²
Maximum Wire Size mm² 1mm²
Minimum Wire Size AWG 20AWG
Maximum Wire Size AWG 18AWG
Tab Size 3.7 x 0.5mm
Tab Width 3.7mm
Tab Thickness 0.5mm
Mount Angle Straight
Shrouded/Unshrouded Unshrouded
Contact Plating Tin
Contact Material Brass
Overall Length 14.5mm
Available to back order for despatch 21/08/2020
Price Each (On a Reel of 15000)
£ 0.036
(exc. VAT)
£ 0.043
(inc. VAT)
Units
Per unit
Per Reel*
15000 - 15000
£0.036
£540.00
30000 - 30000
£0.034
£510.00
45000 - 45000
£0.033
£495.00
60000 - 60000
£0.032
£480.00
75000 +
£0.031
£465.00
*price indicative
Related Products
DH Series is an impedance controlled interface connector ...
Description:
DH Series is an impedance controlled interface connector for high speed transmission. It has a 1mm contact mating pitch. This, coupled with a 0.5mm mounting pitch, makes for a more compact, lower-profile, higher-density alternative to conventional half-pitch interface connectors. Depending on the cable, the DH Series caters for speeds up ...
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, ...
Crimp socket housing with protrusions on a 1mm ...
Description:
Crimp socket housing with protrusions on a 1mm pitch, which accept pre-terminated crimped leads typical stock number 311-6647.,Mate with Top or Side entry headers typical stock numbers 515-1529 and 515-1490 respectively. Low mating force Low profile Time and cost saving pre-terminated leads Polarised housings.
This is a miniature high density connector system ...
Description:
This is a miniature high density connector system offering a wire to wire and wire to board I/O solution commonly used in the automotive industry but suitable for many varying signal transfer applications. Snap in, crimp contacts for cable receptacles Board mounting options are pre-loaded with male contacts For wire ...