TE Connectivity PIDG Butt Wire Splice Connector, Blue, Insulated, Tin Plated 16 → 14 AWG

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

TE Connectivity PIDG Closed Barrel Butt Splice

PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire splice terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both a copper and nylon colour coded sleeve. The copper sleeve surrounding the barrel provides improved wire insulation support after crimping allowing the wire to bend without fraying the insulation or breaking the conductor. The nylon sleeves are colour coded according to wire-size to assist with identification. Inside the PIDG splice terminal wire barrel are serrations which provide maximum contact and tensile strength after crimping. The construction of these PIDG terminals and the use of specialised tool dies allows for uniform insulation thickness under crimping pressure. This pressure is then transmitted evenly to the centre of the crimping area to produce a uniform and reliable crimp. Available with various wire and barrel sizes, these PIDG splice terminals offer a versatile solution to a wide range of wiring applications

Features & Benefits

High conductivity copper body
Copper sleeve for improved wire insulation support
Serrations in wire barrel for maximum contact and tensile strength
Colour coded sleeves for easy wire size and tooling identification
Design enables a reliable and uniform crimp

Product Application Information

These PIDG splice terminals are suitable for use in a wide range of applications with many terminals meeting or exceeding the requirements of MIL-T-7928, Type II, Class 1 and 2. Applications include instruments/control, lighting, power supplies, panel boxes, transportation, lifting equipment, motors, aerospace and appliances.


UL recognised (Approvals only apply to the packs of 100, and only for those terminals marked with an asterisk).


MIL-T-7928 / BS4G178 / UL recognised

TE Connectivity PIDG Terminals

Attribute Value
Splice Type Butt
Wire Size 16 → 14 AWG
Overall Length 32.13mm
Diameter 3.81mm
Insulation Insulated
Colour Blue
Insulation Material Nylon
Series PIDG
Contact Material Copper
Contact Plating Tin
7600 In stock for FREE next working day delivery
Price Each (In a Pack of 100)
£ 0.537
(exc. VAT)
£ 0.644
(inc. VAT)
Per unit
Per Pack*
100 - 400
500 - 2400
2500 - 4900
5000 - 9900
10000 +
*price indicative
Related Products
Cold applied in-line splices that require no heating ...
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride ...
TE heat shrinkable pre-insulated nylon splices and crimp ...
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, ...
Ideal Industries 30-5021EU In-Sure™ push-in connector starter kit, ...
Ideal Industries 30-5021EU In-Sure™ push-in connector starter kit, is a comprehensive introduction to the In-Sure™ push-in connector range, containing 110 In-Sure™ push-in connectors in a sturdy box, a versatile selection designed to cater for many wiring installation applications. Contains 30 x Model 32 (Red), 30 x Model 33 (orange), 30 ...
Ideal Idustries Splice Line™ is an in-line wire ...
Ideal Idustries Splice Line™ is an in-line wire connector that provides a crimp-free, solderless butt-splice. Classified as maintenance free as per BS 7671:2008, the two-port Splice Line™ connector accepts up to 2.5mm2 wire. Amperage/voltage 24A/450VWire range solid 0.5mm2 - 2.5mm2.