TE Connectivity DuraSeal Series Insulated Female Crimp Bullet Connector, 0.5mm² to 1mm², 22AWG to 18AWG, 4mm Bullet

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MX
Product Details

Duraseal - Bullet Terminal

Duraseal bullet terminal constructed of tin plated brass with a heat shrinkable insulation sleeve.

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Specifications
Attribute Value
Series DuraSeal
Insulation Insulated
Insulation Material Nylon
Overall Length 30mm
Gender Female
Minimum Wire Size mm² 0.5mm²
Maximum Wire Size mm² 1mm²
Minimum Wire Size AWG 22AWG
Maximum Wire Size AWG 18AWG
Bullet Diameter 4mm
Colour Red
Contact Plating Tin
Contact Material Copper Alloy
Available to back order for despatch 12/11/2019
Price 1 Bag of 1000
Was £550.08
£ 446.70
(exc. VAT)
£ 536.04
(inc. VAT)
Bag(s)
Per Bag
Per unit*
1 +
£446.70
£0.447
*price indicative
Related Products
PLASTI-GRIP blade wire crimp terminals made of high ...
Description:
PLASTI-GRIP blade wire crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP blade crimp terminals is serrated in order to provide maximum electrical contact and tensile strength after crimping. The funnelled entry on ...
WireGrip connectors or wire splices with industry standard ...
Description:
WireGrip connectors or wire splices with industry standard colour coding for wire sizes 22 AWG to 10 AWG. WireGrip twist-on splices have square-wire spring threads which provide a positive grip for a secure connection and are made from UL 94V-2 flame retardant thermoplastic. Maximum operating temperature of 105°C. Maximum voltage ...
FASTON 187 series quick connect piggyback crimp receptacle ...
Description:
FASTON 187 series quick connect piggyback crimp receptacle tab combination terminals designed for quick and efficient connection and reliability. These FASTON 187 piggyback receptacle terminals have a step down insulation support barrel to compensate for insulation thickness enabling the axial alignment of conductor strands to be maintained. Tapering walls at ...
PIDG (Pre-Insulated Diamond Grip) wire pin crimp terminals ...
Description:
PIDG (Pre-Insulated Diamond Grip) wire pin crimp terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire crimp pin terminals consist of a precision-formed high conductivity copper body and barrel. Inside the barrel are serrations which provide maximum contact and tensile strength after crimping. The wire ...